1 2

1m 3ft Generic 800G QSFP-DD to QSFP-DD Active Optical Cable AOC - F-tone

1m 3ft Generic 800G QSFP-DD to QSFP-DD Active Optical Cable AOC - F-tone

Afficher tous les détails

Transceivers Type

QSFP-DD Optical Transceiver

Specifications

Generic Compatible 800G QSFP-DD AOC Cable (1 meter, QSFP-DD to QSFP-DD)

 

The Generic compatible 800G QSFP-DD AOC consists of a multimode fiber optic cable terminated with QSFP-DD form factor modules at both ends. Each AOC features 8 duplex channels with an aggregate bandwidth of 850Gbit/s. Each channel operates using the PAM4 modulation scheme at a baud rate of 106.25G, with support for distances of up to 30m using OM3 fiber or 50m using OM4 fiber with FEC. The QSFP-DD to QSFP-DD active optical cable is highly suitable for short-range data communication and interconnect applications. F-tone adopts rigorous cable testing to ensure that the 800G QSFP-DD AOC cables provide high performance and superior durability.

 

Part Number FT-QDD-800G-A1M Vendor Name F-tone
Connector Type QSFP-DD to QSFP-DD Data Rate 800Gbps
Mini. Bend Radius 30mm Cable Length 1m (3ft)
Transmitter VCSEL Receiver PIN
Wavelength 850nm Power Consumption < 14W
DDM/DOM Support FEC Yes
Modulation PAM4 Temperature 0 to 70°C (32 to 158°F)
Protocols IEEE 802.3ck, QSFP-DD MSA Warranty 5 Years

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us