1 2

22.9ft (7m) Blue Cat6 Ethernet Network Patch Cable Snagless Unshielded (UTP), 26AWG, 1000Base-T

22.9ft (7m) Blue Cat6 Ethernet Network Patch Cable Snagless Unshielded (UTP), 26AWG, 1000Base-T

Afficher tous les détails

Compatible

Current and Future Category 6/5e/5 Applications

Specifications

Cat6 Ethernet Network Patch Cable Snagless Unshielded (UTP), 26AWG, 1000MBASE-T

 

The Cat6 UTP patch cable is equipped with 26AWG stranded copper cable twisted in an unshielded pair, with a high-performance modular plug at both ends. Its snagless design safeguards the RJ45 connectors' locking clips from any harm or breakage during installation. This cable surpasses the Cat6 Ethernet network cable standard, providing a cost-effective solution for indoor Gigabit Ethernet data center applications, and supports up to 1000Mbps and 550MHz within 100 meters of cable.

 

Cable Type

Cat6 Snagless

Shielding Type

Unshielded

Cable Outer Jacket

PVC

Length

22.9ft (7m) (Including Plugs)

Data Rate

1000MBASE-T and Maximum to 10GBASE-T

Maximum (Tested) Frequency

550MHz

Conductor Type

Stranded Pure Bare Copper

Connectors

RJ45 (Male)

Gauge (AWG)

26 (7/0.16mm)

Cable Outer Diameter 

6.4mm ± 0.4mm

PoE Compatibility

PoE/PoE+/PoE++

Wire Scheme

T568B, Straight

Operating Temperature

-20 to +75°C

Installation Temperature

-10 to +50°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us