1 2

6m (20ft) MTP Female to 12 LC UPC Duplex 24 Fibers Type B Plenum (LSZH) OS2 9/125 Single Mode Elite Breakout Cable

6m (20ft) MTP Female to 12 LC UPC Duplex 24 Fibers Type B Plenum (LSZH) OS2 9/125 Single Mode Elite Breakout Cable

Afficher tous les détails

Compatible

100+ Vendors\n5. SFP+ MSA Compliant","remark":"

Specifications

6m (20ft) MTP Female to 12 LC UPC Duplex 24 Fibers Type B Plenum (LSZH) OS2 9/125 Single Mode Elite Breakout Cable

 

The MTP breakout cable provides a worry-free and cost-effective solution for high-density cabling to convert an MTP connector to an LC duplex connector. This MTP female to 12 LC UPC Duplex OS2 single-mode breakout cable is used for connecting switches or MPO/MTP cassettes.

 

Connector A:

MTP Female

Connector B:

LC UPC Duplex

Fiber Count:

24 Fibers

Fiber Type:

OS2 9/125μm

Polish Type:

APC to UPC

Wavelength:

1310nm/1550nm

Connector:

LC Duplex

Cable Material:

LSZH

MTP Connector Insert Loss:

0.35dB

LC Connector Insert Loss:

0.2dB

Breakout Length:

6m

Return Loss:

≥60dB

Trunk Diameter:

3.0mm

Fan-Out Diameter:

2.0mm

Min. Bend Radius (Fiber Cable) Dynamic:

10mm

Min. Bend Radius (Fiber Cable) Static:

10mm

Operating Temperature:

-20~+70℃

Storage Temperature:

-40~+80℃

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us