1 2

75GHz 64CH DWDM Mux Demux,with Monitor Port, LC/UPC,1U Rack Mount (1528.68nm-1566.42nm)

75GHz 64CH DWDM Mux Demux,with Monitor Port, LC/UPC,1U Rack Mount (1528.68nm-1566.42nm)

Afficher tous les détails

Compatible

Cisco, Juniper, Arista, etc. Get 10G SFP+ DWDM price and datasheet now. ","descriptionBom":"","summary":"","descriptionPc":"","descriptionPhone":"","deliverTemplateId":"","leadTime":null,"madeIn":"","bugMin":0,"packageMin":1,"packaging":"","strategy":"","saleState":1,"saleNum":136,"biaoPrice":null,"salePriceUnit":"","saleUnit":"","productLine":null,"startTime":null,"endTime":null,"publishTime":null,"videoAlbun":"","shortTitle":"DWDM-SFP+-ER-XX C53","videoImage":"","buyUrl":"","discountStartTime":null,"discountEndTime":null,"priceExplain":"","cornerMark":"","productHighlights":"1. Rate: 10G; Connector: Duplex LC\n2. DFB+PIN; Low Power Consumption

Specifications

75GHz 64CH DWDM Mux Demux, with Monitor Port, LC/UPC,1U Rack Mount (1528.68nm-1566.42nm)

 

The 64-channel DWDM MUX DEMUX operates at a frequency of 75GHz, which conforms to the ITU-T G.694.1 100GHZ grid and optimizes the C-band range's capacity. Its wavelength ranges from 1528.68nm-1566.42nm. This device is entirely passive and boasts low insertion loss, with the wavelength ports exhibiting a level of less than 5.5 dB. It can accommodate up to 400G x 64ch business in DWDM transfer systems.

 

 

Wavelength 1528.68nm-1566.42nm Channel Spacing 75GHz
Channel Passband ±0.05nm Technology AAWG (Flat top)
Insertion Loss ≤6.5dB Link Loss ≤11dB
1310nm Port Pass Band Width 1260nm~1360nm Center Wavelength Accuracy ±0.05nm
Insertion Loss @ 1% Mon ≤ 26dB Total Crosstalk ≥5dB
Return Loss ≥ 40dB Directivity ≥ 40dB
Polarization Mode Dispersion ≤1.0ps Polarization Dependent Loss ≤ 0.7dB
Channel Isolation Adjacent ≥18dB
Non-adjacent ≥ 25dB		 Temperature Operating -5 to 65°C
Storage -40 to 85°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us