The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
Features & Applications
| Features | Applications |
|---|---|
| Wavelength 532 - 2100nm available | Coherent Communication |
| Low Insertion Loss | Power Monitor |
| High Stability & Reliability | Fiber Sensor |
Specifications
| Parameter | Unit | Value |
|---|---|---|
| Type | - | 1x2 / 2x2 |
| Center Wavelength | nm | 808 |
| Operating Bandwidth | nm | ±10 |
| Max. Excess Loss | dB | 0.8 / 1.0 |
| Min. Extinction Ratio | dB | 20 |
| Min. Directivity | dB | 50 |
| Max. Return Loss | dB | 50 |
| Max. Optical Power (CW) | W | 3 |
| Fiber Type | - | PM Panda Fiber |
| Package Dimensions | mm | φ3*54 |
| Operating Temperature | ℃ | -5~+75 |
| Storage Temperature | ℃ | -40~+85 |
| Splitting Ratio | 50 | % / ±3.0 |
Ordering Information
PMFUC-①①①-②③③-④④④-⑤⑥-⑦-⑧⑧⑧⑧ (2x2 Type)
①①①
-Wavelength:
808=808nm, SSSS=Specified
②
- Port Type:
3=1x2, 4=2x2
③③
- Tap Ratio：
01=1/99, 05=5/95, ..., 50=50/50
④④④
- Fiber type:
067=PM780-HP, 119=PM850, SSS=Specified
⑤
-
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
-
-
Compatible AVAGO AFBR-2418TZ La fibre optique 850 nm Le dispositif de réception optoélectronique haute performance DC-50 MBd
Prix habituel $0.00Prix habituel -
Fibre optique 850 nm compatible AVAGO HFBR-1412TZ Dispositif émetteur-récepteur optoélectronique hautes performances DC-5 MBd
Prix habituel $0.00Prix habituel -
Fibre optique 850 nm compatible AVAGO HFBR-2412TZ Dispositif émetteur-récepteur optoélectronique hautes performances DC-5 MBd
Prix habituel $0.00Prix habituel
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
Module émetteur-récepteur SFP+ BiDi 10GBASE-BX20-D 1330 nm-TX/1270 nm-RX 20 km DDM Simplex LC SMF compatible Cisco
Prix habituel $0.00Prix habituel -
Fibre optique 650 nm compatible AVAGO HFBR-1521Z Dispositif émetteur-récepteur optoélectronique hautes performances DC-5 MBd
Prix habituel $0.00Prix habituel -
Fibre optique 650 nm compatible AVAGO HFBR-1521Z Dispositif émetteur-récepteur optoélectronique hautes performances DC-5 MBd
Prix habituel $0.00Prix habituel -
Fibre optique 650 nm compatible AVAGO HFBR-1521Z Dispositif émetteur-récepteur optoélectronique hautes performances DC-5 MBd
Prix habituel $0.00Prix habituel
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.