1 1

8 Channel Video & 4 Channel Bi-Directional Data to Fiber SM 20km Optical Video Multiplexer

8 Channel Video & 4 Channel Bi-Directional Data to Fiber SM 20km Optical Video Multiplexer

Afficher tous les détails

Part Number: 8V4BD-SM-20-FM

8 Channel Video & 4 Channel Bi-Directional Data to Fiber Optical Video Multiplexer SM 20KM

Description

Our video, data and audio transmitter and receiver support simultaneous transmission of several channels of 8-bit digitally encoded video. The modules are compatible with NTSC, PAL and SECAM CCTV camera systems and support RS-485, RS422 and RS232 data protocols. Plug and Play design ensures convenience of installation and operation.

Features

  • 8-Bit Uncompressed Video Transmission
  • Compatible with NTSC, PAL, or SECAM CCTV
  • Supports RS-232, RS-422, and RS-485 Data Protocols
  • WDM for Highest Quality Video Transmission
  • No EMI, RFI, Cross Talk, and Ground Loop
  • No Electrical or Optical Adjustments Required
  • LED Indicators for Instant System Monitoring
  • Standalone or Rackmount
  • Transmit up to 30 km without Optical Attenuation
  • Simultaneous Transmission of Video and Data

Applications

  • Intelligent Transportation System
  • Connection of Sub-network for Surveillance Center
  • Public Security Surveillance
  • High Way & Toll Station Surveillance
  • Industrial Closed Circuit Television Surveillance

Technical Specifications

Video
Number of Channels 8 channel Video Video bandwidth 6.5 MHz
Automatic compatible video system PAL, NTSC, SECAM Input/output voltage 1.0 Volt p-p
Video input/output impedance BNC 75 Ω Differential gain < 1.5%
Video signal-to-noise ratio (SNR) ≥67dB Differential phase <1.5°
Video connector BNC Tilt < 5%
Fiber-optic Specification
F/O connector FC (Standard) Transmission Distance 20KM (single mode)
Transmitter Tx Power: -15dBm ~ -8dBm Operating Wavelength TX1310/RX1550nm for Transmitter
Sensitivity: 35dBm
Receiver Tx Power: -15dBm ~ -8dBm TX1550/RX1310nm for Receiver
Sensitivity: 35dBm
Data
Number of Data Channels 4 Bi-Directional Data Connector Terminal Blocks
Data rate DC to 115.2Kbps BER 1.00E-08
Data Formats RS485(2-wire or 4-wire), RS232/422,Contact Closure
Environmental
Operating Temperature -45°C~+75 °C Storage Temperature -45°C~+85 °C
Relative Humidity 0%~95% (non-condensing) MTBF >100,000 hours




This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us