1 1

Cisco QDD-4X100G-LR-S Compatible 400GBASE-PLR4 QSFP-DD 8 x 50G PAM4 1310nm 10km MPO-12/APC SMF Transceiver Module

Cisco QDD-4X100G-LR-S Compatible 400GBASE-PLR4 QSFP-DD 8 x 50G PAM4 1310nm 10km MPO-12/APC SMF Transceiver Module

Afficher tous les détails

Part Number: QDD-4X100G-LR-S

Cisco QDD-4X100G-LR-S Compatible 400GBASE-PLR4 QSFP-DD PAM4 Transceiver Module (SMF, 1310nm, 10Km, MTP/MPO-12/APC, DOM)

The 400GBASE-PLR4 Module, MTP/MPO-12/APC connector, up to 10km over parallel single-mode fiber. It is compliant to IEEE 802.3bs protocol and 400GAUI-8 standards.
The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP-LR-100G.

 

Specifications

 

Cisco Compatible QDD-4X100G-LR-S Vendor Name F-tone
Form Factor QSFP-DD Max. Data Rate 425Gbps (4x 106.25Gbps)
Wavelength 1310nm Max. Cable Distance 10km
Connector MPO-12/APC Media SMF
Transmitter Type EML Receiver Type PIN
TX Power -1.9~4.8dBm Minimum Receiver Power -8.2dBm
Power Budget 6.3dB Receiver Overload 4.8dBm
Max. Power Consumption 9W Extinction Ratio 3.5dB
DDM/DOM Supported Commercial Temperature Range 0 to 70°C (32 to 158°F)
Modulation (Electrical) 8×50G-PAM4 Modulation (Optical) 4×100G-PAM4
CDR (Clock and Data Recovery) TX & RX Built-in DSP Host FEC Supported
Protocols QSFP-DD MSA HW Rev 5.1, QSFP-DD, CMIS Rev 5.0, IEEE 802.3cu, IEEE 802.3bs Warranty 5 Years

 


This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us