Passer aux informations produits
1 de 4

Cisco C13 C14 Compatible 100G DWDM QSFP28 PAM4 80km DOM CS SMF Fiber Transceiver

Cisco C13 C14 Compatible 100G DWDM QSFP28 PAM4 80km DOM CS SMF Fiber Transceiver

Afficher tous les détails

Part Number: DWDM2-Q28100G-80-FM

Cisco Compatible 100G DWDM QSFP28 Transceiver Module (SMF, 80km, CS, DOM)

The 100G DWDM PAM4 transceiver supports to multiple 100G links up to 80km over single-mode fiber (SMF) via an CS connector. PAM4 modulation technology allows for DWDM connectivity in a QSFP28 form factor on the 100G ITU DWDM wavelength grid, and the TDCM and EDFA are required for long-haul transmission. This transceiver is compliant with IEEE 802.3bm, QSFP28 MSA, SFF-8636 and SFF-8024 standards. The built-in digital diagnostics monitoring (DDM) allow access to real-time operating parameters. Featuring low power consumption, high speed and long transmission distance, this transceiver is ideal for DCI, 100G Ethernet Metro-Access over DWDM, Campus and Enterprise Links, etc.

Spotlights

  • Broadcom Chip for Stable Transmission
  • <5w Low Power Consumption
  • Up to 4.8Tbps Data Capacity over a Single Fiber
  • 80km Reach with TDCM and EDFA
  • Available in Fixed DWDM Channels 13 to 60
  • Uses PAM4 Modulation to Achieve 100G

Description

Part Number DWDM2-Q28100G-80 Vendor Name F-tone
Form Factor QSFP28 Max Data Rate 100Gbps (2x50G)
Wavelength 1567.13nm,1566.31nm Max Cable Distance 80km
Connector CS Duplex Cable Type SMF
Transmitter Type EML Receiver Type PIN
DDM/DOM Supported Commercial Temperature Range 0 to 70°C (32 to 158°F)
TX Power -1~4dBm Receiver Sensitivity ≤-12.5dBm
Powerbudget 11.5dBm Receiver Overload ≥5dBm
Power Consumption <5W Extinction Ratio 6dB (Typ.)
Modulation Format PAM4 Protocols IEEE 802.3bm, QSFP28 MSA, SFF-8636, SFF-8024
Application DCI, 100G Ethernet Metro-Access over DWDM,Campus and Enterprise Links Warranty 5 Years

Datasheet

Part Number Distance Fibers Port
QSFP28-SR4-100GFM 100m MMF MTP/MPO-12
QSFP28-PIR4-100GFM 500m SMF MTP/MPO-12
QSFP28-IR4-100GFM 2km SMF LC
QSFP28-LR4-100GFM 10km SMF LC
QSFP28-BLR4-100GFM 10km SMF LC
QSFP28-ER4-100GFM 40km SMF LC

Quality Certifications

Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.

Compatibility Matrix

Having been individually tested on a large amount of branded switches and servers, F-tone.COM generic compatible transceivers break free of vendor lock-in and guarantee continued flawless interoperability and compatibility with third party vendors as below.

ADVA Chelsio A10 Networks Cumulus Linux Gnoda Harting Hitachi Hillstone
D-Link Emulex EdgeCore F5 Networks Hirschmann IMC Networks Ixia Infinera
MRV Palo Alto Networks Nokia Q-logic Inteno JDS Uniphase ISIS Linksys
Solarflare TP Link SMC UniFi Long haul Lanner LevelOne LCSI
Ubiquiti ZYXEL ZTE AOM-CTG-i1SM Milan McAfee Mikrotik Myricom
ASGA Atto Accedian Networks Axis NetScout N-TRON Netscaler NEC
Agilent-Avago Allnet Allied Telesis Altera Stratix Netonix Omnitron Nimble Storage Optelian
Amer Networks Actelis Asante Allen Bradley Stratix Optone Opnext Orckit Optech
Aerohive SR2148P Alaxala Apple Avid ISIS Storage PENo ENto Networks Planet Penguin Arctica PicoLight
Barnfind Blackmagic Broadcom Ceragon QSAN RAD QNAP Redback
Coriant Cyberroam CTCUnion Compaq Ruijie Raiscom Ruggedcom RiverStone
CTC Union Centec Check Point Digital Scientific Atlanta Synology Siemens Seven solution
DCN Delta DATACOM Engenius SAGEM Source Photonics Sixnet Sonnet
Ericsson ELINX EMC ECI Speednt SUN SDN Sophos
FibroLAN Fujitsu Fortinet Fluke Network Telco Transition Networks Tejas TRENDnet
Fortigate Gigamon Fiberhome Gigalight Tellabs Xilinx Vixel XMC20 Keymile


This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.