1 2

Extreme 10313 40G QSFP+ Passive DAC Twinax Cable - F-tone

Extreme 10313 40G QSFP+ Passive DAC Twinax Cable - F-tone

Afficher tous les détails

Transceivers Type

QSFP+ Optical Transceiver

Compatible

200+ Vendors

Specifications

Extreme 10313 Compatible 40G QSFP+ DAC Twinax Copper Cable (3 meters, Passive, QSFP+ to QSFP+ Cable)

 

Extreme 10313 compatible 40G QSFP passive copper direct-attach cable (DAC) is comprised of a Twinax copper cable terminated with QSFP form factor modules on both ends. It is verified to interoperate with original Extreme Networks platforms, including the EXOS series (5520, 5720, X450-G2, X460-G2), MISC SERIES (4120C), VSP series (4900, 5720), BD series (8000), and SLX series (8520, 8720, 8820, 9150, 9250, 9540). This 40G DAC cable has the advantage of convenient installation since the structure of modules is permanently attached to each end.

 

QSFP+ to QSFP+ 40G DAC cable is suitable for very short-distance transmission. It provides a cost-effective and low-power consumption way to build a 40Gb link between QSFP ports of switches or routers with racks and across adjacent racks.

 

Part Number FT-QSFP-PC3 Vendor Name F-tone
Connector Type QSFP+ to QSFP+ Data Rate 40 Gbps
Minimum Bend Radius 33mm Wire AWG 30AWG
Cable Length 3m Cable Jacket PVC (OFNR)

 

Model Contrast Table

Part Number FT-QSFP-PCx FT-QSFP-ACx FT-Q4S-PCx FT-QSFP-Ax FT-Q4S-Ax
Cable Type Passive Direct Attach Copper Active Direct Attach Copper Passive Direct Attach Copper Breakout Active Optical Cable Active Optical Cable Breakout
Max Data Rate 40Gbps 40Gbps 40Gbps 40Gbps 40Gbps
Connector Type QSFP+ to QSFP+ QSFP+ to QSFP+ 40G QSFP+ to 4x10 SFP+ QSFP+ to QSFP+ 40G QSFP+ to 4x10 SFP+
Wire AWG 30AWG 30AWG 30AWG / /
Minimum Bend Radius 33mm 33mm 21mm 7.5mm 7.5mm
Media Copper Copper Copper Optic Fiber Optic Fiber
Jacket Material PVC (OFNR) PVC (OFNR) PVC (OFNR) LSZH LSZH

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us