1 1

MEMS Variable Optical Single-mode Attenuator

MEMS Variable Optical Single-mode Attenuator

Afficher tous les détails

Part Number: FT-MEMS-VOA

MEMS Single-mode Variable Optical Attenuator

F-tone’s designs and manufactures innovative, photonic integrated circuit (PLC)based MEMS (micro electro-mechanical systems)Variable Optical Attenuator for next generation, dynamically configurable optical networks.

F-tone’s MEMS products base on electrostatic MEMS technology, The reflective mirror MEMS technology enables the creation of products with high attenuation levels and can be capabilities, this results in a new category of MEMS components that are designed to exceed specifications for performance, compactness, manufacturability and reliability.

Features

  • Low insertion loss
  • Low polarization dependent loss
  • Compact design
  • Low power consumption
  • Insensitive to shock and vibration
  • Telcordia GR-1221-CORE&RoHS compliance with
  • Operating wavelength: C band(1530-1570nm)
  • Attenuation type: Bright
  • Drive Voltage: 6 V
  • Fiber Type: 900um fiber
  • Fiber Length: 1.0m
  • Connector Type: None

Applications

  • Power control and equalization in multi channel systems
  • Gain-tilt control in EDFAs
  • Receiver protection
  • OADM

Dimensions Diagram

Warm Note




MAKE TO ORDER (Options)

  • The price here is just the VOA-C-B-6-T-10-0 type, if you need other types, please contact our sales. At the same time, we also offer multimode Type, should you have this needs, please contact our sales
MS=MEMS Operating Wavelength Attenuation Type Drive Voltage Fiber Type Fiber Length Connector Type
  • • V=Variable
  • • O=Optical
  • • A=Attenuator
  • • C=C Band
  • • L=L Band
  • • B=Bright
  • • D=Dark
  • • 6=6V
  • • 15=15V
  • •B=250um fiber
  • •T=900um fiber
  • • 10=1.0m
  • • 15=1.5m
  • • 0=None
  • • 1=FC/UPC
  • • 2=FC/APC
  • • 3=SC/UPC
  • • 4=SC/APC
  • • 5=LC/UPC
  • • 6=LC/APC

For assistance customizing your MEMS Variable Optical Attenuator, please call us at +86-1-86-2786-1199 or email to [email protected].

Parameter Unit Specification Note
WavelengthRange nm 1530-1570 Cband
1570-1610 Lband
AttenuationType BrightorDark
AttenuationRange dB ≥30
BlockingStateAttenuation dB ≥40 Darktype
InsertionLoss dB ≤0.7(0.5Typical) ExcludingConnectors
AttenuationResolution Continuous
WavelengthDependentLoss dB ≤0.3 @＜0dBAtt.
≤1.5 @＜20dBAtt.
Ripple dB ≤0.05 Within0.4nmwindow@20dB
PolarizationDependentLoss dB ≤0.1 @＜0dBAtt.
≤0.3 @＜20dBAtt.
TemperatureDependentLoss dB ≤0.7 @＜0dBAtt.comparewithRT
≤1.0 @＜20dBAtt.comparewithRT
ReturnLoss dB ≥45
PMD ps ≤0.1
ResponseTime ms ≤3
OpticalPowerHandling mW 300
DrivingVoltage VDC 6.5Vor15V
VoltageRange VDC ≤6.5Vor≤15V
PowerConsumption mW ≤2
OperatingTemperature ºC 0to70
StorageTemperatureRange ºC -40to85




This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us