1 1

5-Port 10/100M POE Switch with 4-Port POE

5-Port 10/100M POE Switch with 4-Port POE

Afficher tous les détails

Part Number: FT-POE3505

FT-POE3505 5-Port 10/100M Switch with 4-Port POE

Modern business networks are used for increasingly diverse applications – traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today’s converged network often need to be supported not just in terms of data –equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an Ethernet UTP cable is an elegant and easy to implement solution.
FT-POE3505, The New 5-port 10/100M Ethernet PoE Switch combines a small-high efficiency 5-port 10/100BASE-T switch with a standard 802.3af 4-port Power over Ethernet (PoE) capability. The 5-port 10/100M Ethernet PoE Switch incorporates an external 48VDC power adaptor. Each of the four PoE Ethernet ports can provide 15.4 Watts of power as well as 10/100Mbps data transmission over the Inter - connecting Ethernet interface such as Cat 5/5e /6 cables.

Key Features

  • Desktop Ethernet PoE switch.
  • 5 X 10/100Mbps Auto-negotiation Fast Ethernet Switch with 4-Port PoE function port 2 to port 5.
  • 10/100BASE-T Full/half duplex transfer mode on all five ports.
  • Compliant with IEEE 802.3af specification.
  • Supports 802.3af 15.4W per port and 56W for all PoE ports. Max.
  • Supports PoE IEEE802.3af compliant Powered Device (PD).

Specifications

Data Rates 10/100/1000Mbps(IEEE802.3z/AB 10/100/1000Base-T)
1000Mbps (1000Base- SX/LX/ZX)
Input Power Requirements
Input voltage Input voltage
Power over Ethernet Output
Pin Assignment and Polarity 1/2 (V+),3/6 (V-) output power ≤30Watts
1/2 /4/5(V+),3/6/7/8 (V-) output power >30Watts
Environmental Conditions
Operating temperature 0℃ to 40℃
Cooling free air convection
Storage temperature -20℃ to +85℃
Operating Humidity 90% max, non-condensing
Mechanical Specifications
Case Material Iron
Case Color Silver grey
Net Weight 410g approx. /unit
(Do not include external power adaptor)
Dimensions 158(W) x 27(H) x 95(L) (mm)
(Do not include transceiver length)
Connectors
DC Inlet DC470-2.0
LAN 4 port Shielded RJ-45

Ordering Information

Part Number Description - X X
FT-POE3505-XX 5-Port 10/100M Switch with 4-Port POE T:IEEE802.3at 1:15.4W
F:IEEE802.3af 3: 30W
N:Non－standard

This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us