1 1

24-Port 10/100M POE Switch

24-Port 10/100M POE Switch

Afficher tous les détails

Part Number: FT-POE3624

24-Port 10/100M POE Switch

Modern business networks are used for increasingly diverse applications – traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today’s converged network often need to be supported not just in terms of data –equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an Ethernet UTP cable is an elegant and easy to implement solution.
The 24-Port 10/100M PoE Switch is an unmanaged 10/100Mbps Ethernet PoE switch designed to enhance workgroup performance while providing a high level of flexibility. It provides 24 10/100Mbps ports and 24 IEEE802.3af Power over Ethernet (PoE) ports for workstation.

Key Features

  • IEEE802.3af Power over Ethernet (PoE) Standard Compliant.
  • 24 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports.
  • Built-in 24 PoE Port. ( Port 1 ~ Port 24).
  • Supports PoE Power Maximum 15.4 watts for each PoE port.
  • Supports POE Power Device(PD) classification identify.
  • Store and Forward Switching Method.
  • Built-in 2.75Mb RAM Data Buffer and 4K entries MAC Address Table.
  • IEEE802.3x Flow Control for Full-Duplex: Back Pressure Flow Control for Half-Duplex Mode.
  • Supports 802.1Q VLAN, Port-Based IEEE802.1p QoS.
  • 1000Mbps Support based on Type of SFP, LC (option).
  • No Special Networking Cable Required.
  • Plug and Play.
  • IEEE802.3at Standard Options.
Product Specifications Network Protocol and Standard
24-Port 10/100M PoE Switch 24-port 10/100PoE switch IEEE Standard 802.3 10M Ethernet
MAC Address Table 4K Supports 802.3u 100M Fast Ethernet
Transmission Method Store-and-forward 802.3x Flow control
Forwarding Rate 14,880pps 10M /148,880pps 100M /1,488,0001000M 802.3af 15.4W Power over Ethernet
VLANs Support 802.1Q VLAN
Built-in RAM 2.75Mb 802.1p QoS
Support packet length 1536 Bytes 5 port state for Spanning Tree
Interface Options PoE Power Out & Power Input
Interface Options 10Base-t/100Base-T PoE Power Out 48VDC 15.4W Max per Port.
RJ-45 x 24 1000Base-T Max PoE output Powe: 340W
PoE pin-out: Pin 3/6 for + , Pin 1 /2 are -
Power Input 100 ~ 240V/AC, 50 ~ 60 Hz
LED Indicators Per Port: 10/100, Link /ACT
PoE Act /Status Power Consumption 350 watts ( Max)
Per Unit: Power
Dimensions: 430mm x 266mm x 66.4mm Humidity 10% ~ 90% (non-condensing)
16.93in x 10.47 in x 2.61in
Operating Temperature 0°C ~ 40 °C (32° F ~ 104 ° F) Warranty 2 Years
Certification FCC /CE /RoHS

Ordering Information

Part Number Description - X X
FT-POE3624-XX 24-Port 10/100M POE Switch T:IEEE802.3at 1：15.4W
F:IEEE802.3af 3: 30W
N:Non－standard
FT-POE3624M-XX 24-Port 10/100M Managed POE Switch with 2-Port Giga Combo SFP Slot T:IEEE802.3at 1：15.4W
F:IEEE802.3af 3: 30W
N:Non－standard

This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us