1 1

Semiconductor Optical Amplifier SOA Butterfly package 1310nm 18dB Gain

Semiconductor Optical Amplifier SOA Butterfly package 1310nm 18dB Gain

Afficher tous les détails

Part Number: FT-SOABF-13-G18

Semiconductor optical amplifier MSOA-1310

Description

The MSOA-1310 semiconductor optical amplifier addresses new areas in the optical amplification market. The technology is based on well‐known semiconductor laser technology and packaging techniques, and offers a low‐cost alternative to conventional fiber amplifier solutions. SOA can operate at any wavelength and it is very suitable for use in 40G/100G signal amplifying.

Features

  • 40G and 100G O‐Band(1310nm) amplifiers
  • 14‐Pin MSA package
  • Low Noise Figure & Low polarization dependence
  • >1m SMF-28 250µm fiber with FC/APC connector

Absolute Maximum Ratings（T=25 °C）

Item Symbol Rating Unit
SOA Forward Current IF 350 mA
SOA Reverse Voltage VR 2 V
Storage Temperature Tstg -40 to +85 deg.C

Specification

Parameter Symbol Min Typ Max Unit Note
Case Operating Temperature Range Tcase -15 65 ºC T=25 ºC, IF=200mA
Forward Current IF 150 250 mA
Reverse Voltage VREV 2 V
Fiber pigtail bending radius R 35 mm
Tensile strength fiber to case F 5 N
Operation Wavelength l 1280 1330 nm
Gain bandwidth BW 45 nm 3dB bandwidth
Gain G 18 dB
Gain Ripple ΔG 0.2 0.5 dB
3dB saturation output power P3dB 8.5 dBm
Polarization dependent gain PDG 1.0 2.0 dB
Optical noise figure NF 6.5 8 dB

Forward Voltage VF 2.5 V
Thermistor resistance R 9.5 10 10.5 kW
Cooler current Icool 1.1 1.5 A
Cooler voltage Vcool 3.0 3.7 V

Dimensions and PIN


This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us