1 2

Generic Compatible 200G DWDM Tunable CFP2 DCO 1000km DOM Duplex LC SMF Transceiver Module

Generic Compatible 200G DWDM Tunable CFP2 DCO 1000km DOM Duplex LC SMF Transceiver Module

Afficher tous les détails

Transceivers Type

CFP Optical Transceiver

Compatible

200+ Vendors\n5. Hot Pluggable QSFP28 MSA Compliant","remark":"

Specifications

Generic Compatible 200G DWDM Coherent CFP2-DCO Transceiver (1000km, LC Connector)

 

The CFP2-DCO coherent transceivers are capable of supporting flex-grid DWDM tuning and can provide 400GBase-DCO throughput over single-mode fiber (SMF) up to 80km using an LC connector. Additionally, these transceivers offer support for digital optical monitoring (DOM) which allows access to real-time operating parameters. These transceivers have been specifically designed for use in line-side trunk DWDM data center interconnect (DCI) as well as OTU4/OTUCn metro optical transport networks.

  

Part Number DWDM-CFP2-1000KM Vendor Name F-tone
Form Factor CFP2 Max Data Rate 100/200Gbps
Grid Spacing 50GHz Frequency Range 190.7 to 196.65THz
Optical Channels 80/96 Tunable Wavelength CH13~CH60 (C-Band)
Transmission Protocols

200GbE/OTU4

 Max Cable Distance 1000KM
Connector Duplex LC Media SMF
Tx output power -15~1dBm Input Power Range -21~0dBm
Line Modulation DP-8QAM/16QAM Power Consumption ≤28W
Host FEC SD FEC, ITU-T G709 FEC Commercial Temperature Range 0 to 70°C (32 to 158°F)
Protocols CFP2 MSA Hardware Specification 1.0 with modifications compliant, CFP MSA Management Interface Specification 2.2 with modifications compliant, IEEE 802.3bm, OIF CEI-28G VSR, OIF CEI-56G VSR PAM-4 Warranty 1 Year

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us