1 2

Juniper JNP-QSFPP-40G-BXSR Compatible 40GBASE-BXSR BiDi QSFP+ 100m Transceiver Module - F-tone

Juniper JNP-QSFPP-40G-BXSR Compatible 40GBASE-BXSR BiDi QSFP+ 100m Transceiver Module - F-tone

Afficher tous les détails

Transceivers Type

QSFP+ Optical Transceiver

Compatible

100+ Vendors

Specifications

Juniper JNP-QSFPP-40G-BXSR Compatible  40GBASE-BXSR BiDi QSFP+ Optical Transceiver Module (MMF, Left LC: 850nm-Tx/900 nm-RX, Right LC: 900nm-Tx/850 nm-RX, 100m, Duplex LC, DOM)

 

Juniper JNP-QSFPP-40G-BXSR Compatible 40GBASE-BXSR BiDi QSFP+ optical transceiver has two bi-directional transmitter/receivers, supporting 40Gbps by 2X 20G channels up to 100m over OM3 or 150m over OM4 MMF. This 40GBASE-BXSR is compliant to IEEE802.3-2015 XLPPI Electrical Specification, QSFP+ MSA  and SFF-8436. DOM/DDM (digital diagnostics monitoring) function is supported on the QSFP 40G fiber optic transceiver to achieve real-time operating parameters monitoring. The 40G-BXSR BiDi QSFP+ is used for 40 Gigabit Ethernet.

 

Part Number BIDI-QSFP+-SR4 Vendor Name F-tone
Form Factor QSFP+ Max Data Rate 41.2Gbps
Wavelength left LC: 850nm-Tx/900 nm-RX
right LC: 900nm-Tx/850 nm-RX 		Max Cable Distance 100m@OM3/150m@OM4
Connector Duplex LC Cable Type MMF
Transmitter Type VCSEL Receiver Type PIN
DDM/DOM Supported Commercial Temperature Range 0 to 70°C (32 to 158°F)
TX Power -7.5~3dBm Receiver Sensitivity <-9.1dBm
Extinction Ratio >2.0dB CDR (Clock and Data Recovery) Built-in
Power Consumption ≤3.5W EMC (Electro Magnetic Compatibility) Supported
Protocols QSFP+ MSA, IEEE 802.3ba XLPPI electrical interface Compliant, SFF-8436 Warranty 5 Years

Model Contrast Table

Part Number

FT-QSFP28-SR4

FT-QSFP28-PSM4

FT-QSFP28-IR4

FT-QSFP28-LR4

FT-QSFP28-CWDM-LR4

FT-QSFP28-ER4

FT-QSFP28-ZR4

DWDM-QSFP28-ZR-XX

Wavelength

850nm

1310nm

1271~1331nm

1310nm

1271~1331nm

1310nm

1310nm

DWDM CH13~60

Max Distance

100m

500m

2km

10km

10km

40km

80km

80km

Cable Type

OM3/OM4 MMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

Connector

MPO/MTP-12

MPO/MTP-12

LC Duplex

LC Duplex

LC Duplex

LC Duplex

LC Duplex

CS Duplex

Tx Power(dBm)

-8.4~2.4

-5~2

-6.5~2.5

-4.3~4.5

-6.5~2.5

-2.9~4.5

2~6.5

-1~4dBm

Rx Sensitivity(dBm)

-10.3

-11.4

-11.5

-10.6

-13

-20.9

-28

-12.5

Max Power Consumption

1.8W

3.5W

3.5W

3.5W

3.5W

4.5W

6W

5W

Source

VCSEL+PIN

DFB+PIN

CWDM DFB+ PIN

EML+PIN

CWDM DFB +PIN

EML+APD

EML+SOA&PIN

EML+APD

Operating Temperature

0~70°C

0~70°C

0~70°C

0~70°C

-40~85°C

0~70°C

0~70°C

-20~85°C

0~70°C

-40~85°C

0~70°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us