1 2

Mini Unmanaged 1x 100M/1G/2.5G/5G/10GBase-T RJ45 to 1x 10GBase-X SFP+ Slot 10Gigabit Ethernet Media Converter,

Mini Unmanaged 1x 100M/1G/2.5G/5G/10GBase-T RJ45 to 1x 10GBase-X SFP+ Slot 10Gigabit Ethernet Media Converter,

Afficher tous les détails

Transceivers Type

SFP+ Optical Transceiver

Compatible

a wide range of 10G SFP+ transceivers, including 10GBASE-SR/LR, BiDi SFP+, CWDM, etc. All of the optical transceivers are available at F-tone.

Specifications

Mini 10G Ethernet Network Media Converter (1x 100M/1G/2.5G/5G/10GBase-T RJ45 to 1x 10GBase-X SFP+)

 

This fiber to 10 Gigabit Ethernet media converter is configured with a 100M/1G/2.5G/5G/10GBase-T RJ45 port and a 10GBase-X SFP+ port. It is used to extend the transmission distance of the copper network system at speeds of 10Gbps. Media converters are widely used in structured cabling systems to interconnect fiber optic cabling systems with existing copper cables.

 

The fiber optic media converter is compatible with a wide range of 10G SFP+ transceivers, including 10GBASE-SR/LR, BiDi SFP+, CWDM, etc. All of the optical transceivers are available at F-tone.

 

Ports

1x 100M/1G/2.5G/5G/10GBase-T RJ45 Port

1x 10GBase-X SFP+ Port

Standards and Protocols

IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz,
IEEE 802.3an, IEEE 802.3ae, IEEE 802.3x

Cable Type (Fiber)

Multimode 50/125µm, 62.5/125µm
Single-mode 9/125µm

Cable Type (Copper)

UTP Cat 5, 5e, 6 Cable (Maximum 100m)
EIA/TIA-568 100Ω STP (Maximum 100m)

LED Indicators

TP/LNK, SPD, FX/LNK, PWR

DIP Switch

LFP/ ALS/ FX Speed/FX Reset

Power Consumption

Full-load<5W
Without Module≤2W

Jumbo Frame

16k

Operation Mode

10/100Mbps for Half/Full duplex
1000Mbps for Full Duplex

Dimensions (HxWxD)

0.79''x2.36''x3.54'' (20x60x90mm)

MTBF (hrs)

>50,000Hrs

Latency

 3us Ultra-low

Operating Temperature

0°C to 50°C

Input Power

DC 5-12V

Relative Humidity

5%~90% (Non-condensation)

Warranty

1 year

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us