1 1

SMA905-SMA905 Plastic Optical Fiber POF Patch Cord

SMA905-SMA905 Plastic Optical Fiber POF Patch Cord

Afficher tous les détails

Part Number: POF-SMA905-SMA905-FM

SMA905-SMA905 Plastic Optical Fiber POF Patch Cord 1M length

SMA connector holds stainless steel ferrule that can be held in a standard optical positioner. This significantly reduces fiber breakdown, usually the result of beam misalignment in which the laser energy is focused outside the fiber core on portions of the connector that could easily burn, causing fiber damage. An option for the fiber tip cantilevered within an SMA connector ferrule, which is bored to remove epoxy and other material from the fiber perimeter, reducing fiber breakdown. A heat sink is attached to the rear of the connector, which conducts extraneous heat away from the fiber, further reducing the possibility of breakdown.

Features:
Improve attenuation and enhance quality of transmission
Minimal transfer loss
Economical and highly reliable based on NPR’ high speed automatic assembly technologies
Low Weight
Easy Assembly and Installation
Large Diameter Core and Thin Clad



This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us