1 2

QT860-PA, 20dB Gain DWDM EDFA Pre-Amplifier, 16dBm Output

QT860-PA, 20dB Gain DWDM EDFA Pre-Amplifier, 16dBm Output

Afficher tous les détails

Compatible

Cisco C21 1560.61nm. Get 10G SFP+ DWDM price and datasheet now. ","descriptionBom":null,"summary":null,"descriptionPc":null,"descriptionPhone":null,"deliverTemplateId":null,"leadTime":null,"madeIn":null,"bugMin":null,"packageMin":null,"packaging":null,"strategy":null,"saleState":1,"saleNum":241,"biaoPrice":null,"salePriceUnit":null,"saleUnit":null,"productLine":null,"startTime":null,"endTime":null,"publishTime":null,"videoAlbun":"","shortTitle":"DWDM-SFP+-ZR-XX C21","videoImage":null,"buyUrl":"https:\/\/store.F-tone.com\/collections\/10g-dwdm-sfp\/products\/c21-dwdm-sfp10g-co","discountStartTime":null,"discountEndTime":null,"priceExplain":null,"cornerMark":"","productHighlights":"1. Rate: 10G; Connector: Duplex LC\n2. EML+APD; Low Power Consumption

Specifications

QT860-PG1620, 20dB Gain DWDM EDFA Pre-Amplifier, 16dBm Output

 

The main function of the EDFA (Erbium Doped Fiber Amplifier) optical amplifier board is to perform power compensation for the signal light in the transmission link, and can simultaneously amplify up to 48 channels in the C-band (channel spacing is 100GHz) or 96 channels (channel spacing is 50GHz) It has the characteristics of flat gain, adjustable gain, and low noise figure. This EDFA can be highly integrated in the chassis of the QT860 series.

 

Amplifier Type Pre-amplifier Operation Wavelength 1529nm~1561nm(Typical)
1528nm~1568nm(Extend)
Optical Gain 20±3dBm Gain Flatness 1.5dB (Typical)
Input Power -32dBm~--4dBm Saturated Output Power 16dBm
Noise Figure ≤5.5dB Return Loss ≥50dB
Optical Connector LC/UPC Management Telnet、SNMPv2、Web
Power Consumption

＜15w

Full Configuration ＜60w

 Operation Mode AGC/APC
VOA Built-in Two-stage signal amplification Optional
Operation Temperature -10 to 60°C
Storage Temperature		 -40 to 85°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us