1 1

SM-280 Automatic Fiber Thermal Stripper for Ribbon fiber stripping

SM-280 Automatic Fiber Thermal Stripper for Ribbon fiber stripping

Afficher tous les détails

Part Number: SUNMA-SM-280

SM-280 Automatic Thermal Fiber Stripper for Ribbon 4/8/12 Fibers stripping

Fiber thermal stripping device design has the advantages of small size, light weight, easy to use and reliable, longitudinal stripping, stripping force is small, peel high fiber quality; blade, durable, and the replacement is convenient,

The linear bearing guide and thermal stripping, ensure no damage to the fiber, easy peeling coating, stripping speed etc..

Specification
Coating strip length Max 30mm
Heating mode Cover Heating
Always heating
Temperature setting 70℃、80℃、90℃、

100,160℃
Optical fiber fixing method Using FH-1, FH-2, FH-4, FH-8, FH-12 series fixtures
Power supply mode Using the adapter to DC12V power conversion
Size 118.5(L) X 46(D) X 31.5(H) mm
Weight 300g
Environmental requirements The temperature of 0-40 DEG C below 85%


Ribbon Fiber Thermal Stripper SM220


Li-on Battery Fiber Thermal Stripper SM230


Dia 0.9mm Fiber Thermal Stripper SM240


This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Tout afficher

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Tout afficher

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us