1 1

10/100/1000M Gigabit Ethernet Singlemode Single-Fiber BiDi Media Converter

10/100/1000M Gigabit Ethernet Singlemode Single-Fiber BiDi Media Converter

Просмотреть всю информацию

10/100/1000M Gigabit Ethernet Singlemode Single Fiber BiDi Standalone Media Converter

The SA-GEA-SM-B series Gigabit Ethernet fiber media converters comply with IEEE 802.3/ab Gigabit Ethernet standard. It supports two types of media for network connection such as 10/100/1000 Base-T to 1000 Base SX/LX/EX/ZX and connects these two types of segments to operate smoothly. SA-GEA-SM series can be used in 14 slot chassis as plug in module. The Fiber Media Converter transforms 1000Base-T (Copper Gigabit) media to 1000Base-SX/LX/EX/ZX (Fiber Gigabit) media and vice versa. The 1000Base-T port supports full-duplex Gigabit connection at wire speed with RJ45 connector. The fiber Gigabit connection supports shortwave (SX) or long wave (LX) laser optic with multi-mode or single-mode.

10/100/1000 means,  that media converter that converts the electrical signal of a 10/100/1000 Ethernet signal from copper to fiber. This solution will offer a low-cost integration option for network managers who want to migrate from 10/100 networks to Gigabit Ethernet. Gigabit only switches can now be connected to 10/100 networks without the need to upgrade the 10/100 side, allowing network managers to add new equipment gradually.

Features

  • Compliant with IEEE 1000Base-T and 1000Base-LX
  • One 10/100/1000Base-T RJ-45 port autosensing featured!
  • One 1000Base-LX/SX Port with SC/ST/FC Type Connector
  • Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
  • Wall-Mountable, pluggable in universal chassis, or desktop
  • Available in SingleFiber WDM versions - 1310/1550 nm wavelenghts used
  • Standards: IEEE802.3z/ab 1000Base-T 1000Base-SX/LX
  • LED Indicators: FX LINK, FX FDX, TP LINK, TP FDX, ACT, POWER
  • Data rate: 2000Mbps full duplex
  • TP: 1000 FDX with NWAY auto-negotiation


Specifications

  • Wavelength: Single-mode 1310nm, 1550nm
  • Fiber cable(m): 8.3/125, 8.7/125, 9/125 or 10/125 single-mode
  • Maximum distance: Multimode;550m Single-mode;20km/40km/60km/80km/100km/120km
  • Power supply: External, Built-in, USB
  • Dimensions: 81mm(L)X105mm(W)X26.2mm(H)
  • Environment
    • Relative humidity: 5% to 90%
    • Operating temperature: 0 to 70
    • Storage temperature: -20 to 85

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us