
Transceivers Type
SFP+ Optical Transceiver
Compatible
100+ Vendors\n5. SFP+ MSA Compliant","remark":"
Specifications
10 Gigabit Ethernet Network Media Converter (1x 100M/1G/2.5G/5G/10GBase-T RJ45 to 1x 10GBase-X SFP+)
The 10G Base-T to 10G Base-R fiber optic transceivers offer support for two different media network connections: 10GBase-T and 10GBase-FX. These transceivers employ a 10Gbase Ethernet PHY chip design, enabling seamless integration between the two network segments. They can be used as standalone units or integrated as embedded modules in 19-inch converter racks for centralized wiring closets. The manufacturing process follows standard procedures to ensure reliability and safety of the product.
This series of transceivers facilitates the conversion of data signals between twisted pair and optical fiber transmission media, providing a solution for users of long-distance and high-speed Ethernet networks to meet their demands. It is particularly well-suited for telecommunications, broadcasting, and broadband network users, delivering a dependable and secure high-speed Ethernet connection.
| Ports |
1 x 100M/1G/2.5G/5G/10GBase-T RJ45 Port 1 x 10GBase-X SFP+ Port |
Standards and Protocols |
IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3an, IEEE 802.3ae, IEEE 802.3x |
| Cable Type (Fiber) |
Multimode 50/125µm, 62.5/125µm Single-mode 9/125µm |
Cable Type (Copper) |
UTP Cat 5, 5e, 6 Cable (Maximum 100m) EIA/TIA-568 100Ω STP (Maximum 100m) |
| LED Indicators |
TP/LNK, SPD, FX/LNK, PWR |
DIP Switch |
LFP/ ALS/ FX Speed/FX Reset |
| Power Consumption |
Full-load<5W Without Module≤2W |
Jumbo Frame |
16k |
| Operation Mode |
10/100Mbps for Half/Full duplex 1000Mbps for Full Duplex |
Dimensions (HxWxD) |
94mm*70mm*26mm |
| MTBF (hrs) |
>50,000Hrs |
Latency |
3us Ultra-low |
| Operating Temperature |
0°C to 50°C |
Input Power |
DC 5-12V |
| Relative Humidity |
5%~90% (Non-condensation) |
Warranty |
1 year |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
