1 2

20m (66ft) Generic 400G QSFP-DD DR4 to 4x QSFP28 DR1 Breakout Active Optical Cable (AOC) - F-tone

20m (66ft) Generic 400G QSFP-DD DR4 to 4x QSFP28 DR1 Breakout Active Optical Cable (AOC) - F-tone

Просмотреть всю информацию

Transceivers Type

QSFP-DD Optical Transceiver

Specifications

Generic Compatible 400G QSFP-DD DR4 to 4x QSFP28 DR1 Breakout Active Optical Cable (20m, Actiive, 0-70°C, QSFP-DD to QSFP28)

 

The 400G QSFP-DD DR4 to 4xQSFP28 DR1 SMF active optical breakout cable is used in 4x 100 Gigabit Ethernet links over OS2 single mode fiber, which provides connectivity between system units with a 400GbE connector on one side and four separate 100GbE connectors on the other four sides. The cable connects data signals from each of the 8 SMFpairs on the single QSFP-DD end to the dual pair of each of the QSFP28 multiport ends. Host FEC is required to support up to 500m fiber transmission.

 

The active optical splitter cable is compliant with the QSFP-DD-MSA and with 100GBASE-DR1 specification, they are ideal for data centers and cloud networks.

 

Part Number FT-400G-Q4Q28-A20M Vendor Name F-tone
Connector Type QSFP-DD to QSFP28 Data Rate 400G
Transmitter Type VSCEL Receiver Type PIN
Cable Length 20m (66ft) Jacket Material LSZH
Cable Type AOC Media Optic Fiber
Power Consumption <9.5W on QSFP-DD end, <4W on QSFP28 end Temperature 0 to 70°C (32 to 158°F)
Protocols IEEE 802.3cd, CMIS4.0, 100G Lambda MSA Modulation

QSFP-DD: PAM4

QSFP28: NRZ

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us