1 2

20m 66ft MPO-24 to 12x LC Duplex 24 Fibers LSZH OM3 Multimode Elite Breakout Cable - F-tone

20m 66ft MPO-24 to 12x LC Duplex 24 Fibers LSZH OM3 Multimode Elite Breakout Cable - F-tone

Просмотреть всю информацию

Transceivers Type

SFP Optical Transceiver

Compatible

100+ Vendors\n5. SFP+ MSA Compliant","remark":"

Specifications

20m (66ft) MPO-24 UPC (Female) to 12x LC UPC Duplex OM3 Multimode Elite Breakout Harness Cable, 24 Fibers, Type B, LSZH, Aqua

 

The MPO-24 multimode breakout cable converts an MPO connector to 12x LC duplex connectors, providing a cost-effective high-density cabling solution for scenarios where rack space saving and cable management is in concern. This 24 fibers MPO to 12 LC OM3 multimode breakout cable is commonly used for data rata conversion, such as splitting a single high-speed link (like a 100G CPAK transceiver) into multiple 10G channels, which are then routed to individual LC SFP+ transceivers.

 

Connector A MPO Female Connector B LC UPC Duplex
Fiber Count 24 Fibers Fiber Type OM3 MMF 50/125μm
Polish Type UPC to UPC Cable Material LSZH
Armoured No Wavelength 850/1300nm
Insert Loss ≤0.35dB Return Loss ≥30dB
Cable Diameter 3.0mm Tensile Strength 80/150N (Long/Short Term)
Min. Bend Radius (Fiber Core) 7.5mm Min. Bend Radius (Fiber Cable) 20/10D (Dynamic/Static)
Attenuation (dB/km) ≤2.3 at 850nm, ≤0.6 at 1300nm Polarity Type B
Max. Transmission Distance 300m Effective Bandwidth ≥2000MHz·km at 850nm
Operating Temperature -10℃~ to 70℃ Storage Temperature -40℃ to +85℃

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us