1 1

MTP to 10 LC UPC Duplex 20 Fibers OM4 Multimode Harness Cable, LSZH Bunch

MTP to 10 LC UPC Duplex 20 Fibers OM4 Multimode Harness Cable, LSZH Bunch

Просмотреть всю информацию

Part Number: 20XFMTPLCOM4

Low Loss MTP-10LC Duplex OM4 50/125 Multimode Fiber Optic Harness Fan-out/Breakout Cable

Connector A MTP Connector B LC UPC (10)
Fiber Category 50μm MM (OM4) Fiber Count 24
Fiber Type Duplex Wavelength 850nm
Cable Jacket 3.0mm LSZH-Magenta Fan-Out Diameter 2.0mm
Insertion loss, max. ≤0.35dB Return Loss,min. MTP≥20dB, LC≥30dB
Breakout Length 0.5m Durability ≥500 times
Min. Bend Radius Installation 29 mm Min. Bend Radius Operation 15 mm
Tensile strength 400 N Crush resistance (Reversible) 750 N/10 cm
Operating Temperature -40° to +80°C Fiber Grade G.651
Key Features and Applications

Allow seamless integration into the most common SAN directors Ensuring efficient use of horizontal and vertical rack pathways, improves the airflow Provide consistent quality, ensure system performance Compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard
Storage Area Network(SAN) Local Area Network(LAN) Switch Parallel Processing Applications Equipment Distribution Area (EDA) Patch Field Applications
What LC leg length should I use for a MTP to LC Harness?
1. Figure 1 is about four types of connector order for your reference, please confirm the length and sort order according to your installation requirement.
2. From which direction should the staggered harness cable utilizing your switch? Figure 2 illustrates the different cabling directions.
Guidelines for Fiber Polarity
Polarity Key Position Fiber Features 12 Fibers Laying Application
Type A (straight through transmission) Key up Each fiber is in the same position on each end 1 to 1...12 to 12 Typically for connecting FAPs and cassettes in 10Gbps networks
Type B(full flipped transmission) Key up The fiber is fully flipped on either end 1 to 2 3 to 4...11 to 12 Connecting to QSFP+ /CFP / FAPs or cassettes in 10G to 40G/100G
High Quality MTP-LC Cable Guarantee
a.High-performance polishing machine, and complemented by precision plates holders designed for MT ferrules.
b.3D interferometer provides verification of MTP/MPO polishing process, and making all parameters of the polished MT ferrule complies and exceeds industry standards.
c.The flexibility of the tester provides the complete spectrum of optical testing required for complex and high fiber count cable assemblies.


This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us