1 2

24-Port Gigabit Ethernet L3 Stackable Fiber Switch with 8x 1G RJ45 Ports and 10G Uplinks, S5300-24S8T6X - F-tone

24-Port Gigabit Ethernet L3 Stackable Fiber Switch with 8x 1G RJ45 Ports and 10G Uplinks, S5300-24S8T6X - F-tone

Просмотреть всю информацию

Transceivers Type

SFP Optical Transceiver

Compatible

100+ Vendors\n5. SFP+ MSA Compliant","remark":"

Specifications

24-Port Gigabit L3 Aggregation Ethernet Managed Fiber Optic Switch, 24x GE SFP Ports, 8x GE RJ45 with 6x 10GE SFP+ Uplinks, Support Stacking

  

The S5300-24S8T6X is a Ethernet-managed aggregation switch with 24x GE SFP ports, 8x GE RJ45, and 6x 10GE SFP+ uplink ports, supporting a switching capacity of up to 184 Gbps and a forwarding rate of 138 Mpps, for stable transmission. This 24-port SFP switch with the ability to support the stacking of up to eight S5300 Series switches, these layer 3 managed switches can be seamlessly treated as a single logical entity, facilitating convenient management. This managed network switch is equipped with 1+1 redundant hot-swappable power supplies and 2 built-in  intelligent fans to enhance network reliability. Effortlessly control and manage the switch through both CLI and WEB interfaces. The S5300-24S8T6X aggregation switch is an excellent choice for enterprise network requirements, campus networks, and SMBs.

 

Part Number S5300-24S8T6X Vendor Name F-tone
Ports 24x 1G SFP | 8x 1G RJ45 | 6x 10G SFP+ Packet Buffer 2 MB
Switching Capacity 184 Gbps Forwarding Rate 138 Mpps
MAC Address 32K ARP Table 8189
VLAN IDs 4K Jumbo Frame 9K
Flash Memory 16 MB RAM 512 MB
Airflow Left-to-right Fan 2 built-in fans
Input Voltage 100 to 240 VAC, 50Hz±10% Power Supply 1 hot-swap AC power supply (default)
1+1 redundant power slots, DC optional
Stackability 8 MTBF ＞200,000 hours
Dimensions (H x W x D) 44.5 x 442.5 x 350 mm
(1.75 x 17.42 x 13.78") 		Weight 5.5 kg
Operating Temperature -10 to 45℃ (14 to 113℉) Warranty 5 Years

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us