1 2

40G/100G OTN Muxponder, 4x SFP+/SFP28 to 1x QSFP+/QSFP28

40G/100G OTN Muxponder, 4x SFP+/SFP28 to 1x QSFP+/QSFP28

Просмотреть всю информацию

Transceivers Type

QSFP28 Optical Transceiver

Compatible

100+ Vendors\n5. Hot Pluggable QSFP28 MSA Compliant","remark":"

Specifications

40G/100G Muxponder for Multi-Service Transmission

 

The 40G&100G Muxponer service board supports Forward Multiplexing: 4x10G↔40G or 4x25G↔100G and Reverse Multiplexing: 40G↔ 4x10G or 100G↔4x25G electrical layer multiplexing/demultiplexing and can convert the multiplexed/demultiplexed optical signals into WDM standard wavelength optical signals, so that the multiplexing unit can perform different wavelengths. Wavelength division multiplexing is performed on the optical signal, and the inverse process of the above process is realized at the same time. It is suitable for 10G~25G forward multiplexing or 40G/100G reverse multiplexing intra-metro wavelength division short-distance transmission scheme.

 

Interface 10G SFP+/ 25G SFP28, 40G QSFP+/100G QSFP28 Interface Protocols 10GE, 25GE, 40GE, 100GE, 8G, 10G, 16G, 32G FC, STM-64, OTU2, OTU3, OTU4, eCPRI
Interface Wavelength Range

1528~1568nm (C-Band)

1270~1610nm (CWDM)

 Power Consumption ＜13w
Out-Band Management

SNMP v2, WEB

 MTBF ＞100000 hours
Operating Temperature -5 to 50°C Storage Temperature 40 to 70°C

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us