1 2

5M Mellanox MCP1600-C005 Compatible 100G QSFP28 Passive Direct Attach Copper Twinax Cable

5M Mellanox MCP1600-C005 Compatible 100G QSFP28 Passive Direct Attach Copper Twinax Cable

Просмотреть всю информацию

Transceivers Type

QSFP28 Optical Transceiver

Compatible

200+ Vendors

Specifications

Mellanox MCP1600-C005 Compatible 100G QSFP28 Direct Attach Cable (DAC) Twinax Cable (5 meters, Passive, QSFP28 to QSFP28)

 

Mellanox MCP1600-C005 compatible 100G QSFP28 DAC is comprised of a Twinax copper cable terminated with QSFP28 form factor modules on both ends. It is verified to interoperate with a wide range of original Mellanox (NVIDIA) platforms, including the NVIDIA Spectrum Ethernet switches (SN5400, SN4600C, SN3700C, SN3420, SN2201, SN2010, SN2100) and ConnectX-6 Dx 100G/200G Ethernet NIC adpter cards. 100G DAC cable has the advantage of convenient installation since the structure of modules is permanently attached to each end.

 

QSPF28 to QSFP28 100G DAC cable is suitable for very short-distance transmission. It provides a cost-effective and low power consumption way to build a 100Gb link between QSFP28 ports of switches or routers with racks and across adjacent racks.

 

Part Number

FT-Q28-PC5

Vendor Name

F-tone

Connector Type

QSFP28 to QSFP28

Data Rate

100Gbps

Minimum Bend Radius

33mm

Wire AWG

30AWG

Cable Length

5M

Cable Jacket

PVC (OFNR)

 

Model Contrast Table

Part Number FT-Q28-PCx FT-Q28-4S28-PCx FT-Q28-Ax FT-Q28-4S28-Ax
Cable Type Passive Direct Attach Copper Passive Direct Attach Copper Breakout Active Optical Cable Active Optical Cable Breakout
Max Data Rate 100Gbps 100Gbps 100Gbps 100Gbps
Connector Type QSFP28 to QSFP28 100G QSFP28 to 4x25 SFP28 QSFP28 to QSFP28 100G QSFP28 to 4x25 SFP28
Wire AWG 30AWG 30AWG / /
Minimum Bend Radius 33mm 25mm 7.5mm 7.5mm
Media Copper Copper Optic Fiber Optic Fiber
Jacket Material PVC (OFNR) PVC (OFNR) LSZH LSZH

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us