Перейти к информации о продукте
1 из 1

1ft (0.3m) Cat6 Snagless Unshielded (UTP) PVC CM Slim Ethernet Network Patch Cable, Green

1ft (0.3m) Cat6 Snagless Unshielded (UTP) PVC CM Slim Ethernet Network Patch Cable, Green

Просмотреть всю информацию

Part Number: C6-UTPSGSPVCGR-0.3M

Cat6 Snagless Booted Unshielded (UTP) Slim Ethernet Network Patch Cable, 28AWG, 1/10G Base-T

The Cat6 slim patch cable is the perfect solution for high density datacenter applications. Smaller patch lead size helps alleviate congestion as well as improving airflow with in the racks. Snagless boot prevents unwanted cable snags during installation and provides extra strain relief. For fast Ethernet and Gigabit computer networks, Category 6 copper cable supports speeds up to 10 Gbps over 37-55 meters of cable and 100 meters for slower (the 10/100/1000BASE-T standards) network.
Product Specifications
Cable Type Cat6 Slim Snagless Shielding Type Unshielded (UTP)
Cable Jacket PVC CM (Round) Length 1ft (0.3m) (Including Plugs)
Conductor Material Oxygen-free Copper Conductor Type Stranded
Data Rate Support 1000Base-T and Maximum to 10GBase-T Standard Bandwidth 250MHz
Gauge (AWG) 28 (7/0.12mm) Cable Outer Diameter (mm) 3.8 ± 0.2
Max Transmission Distance 100m Twisted Pairs 4 Pairs
Wire Scheme T568B, Straight Standard ISO/IEC 11801, ANSI/TIA-568.2-D
Operating Temperature -20 to +75°C (-4 to 167°F) Installation Temperature -10 to +50°C (14 to 122°F)

Network Connectivity

Cat6 network patch cable is the cost-effective 1G/10GBASE-T copper cabling solution for data center and SMB applications, ideal for switches, servers, patch panels or other equipment.


Quality Testing Program


Quality Certifications

Product Highlights


This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.