1 2

Cisco SFP-H10GB-CU2-5M Compatible 10GBASE-CU SFP+ Passive DAC Twinax Cable - F-tone

Cisco SFP-H10GB-CU2-5M Compatible 10GBASE-CU SFP+ Passive DAC Twinax Cable - F-tone

Просмотреть всю информацию

Transceivers Type

SFP+ Optical Transceiver

Compatible

200+ Vendors

Specifications

Cisco SFP-H10GB-CU2-5M Compatible 10G SFP+ DAC Twinax Cable (2.5-meter/8.2 feet, Passive, SFP+ to SFP+, 30AWG)

 

Cisco SFP-H10GB-CU2-5M compatible 10G SFP+ Passive Direct Attach Copper Cable (DAC cable) is comprised of a 2.5m/8.2ft Twinax copper cable terminated with SFP+ connectors on both ends.

 

F-tone manufactured 10G SFP+ cable is compliant with IEEE 802.3, SFF-8431, SFP+ MSA specifications. Besides, the high-speed Twinax cable has been verified to interoperate with original Cisco switches, including the Catalyst 2960/3850 and Nexus 9000/7000 series, etc. The third-party 10G direct attach cable is an ideal substitute to the Cisco SFP-H10GB-CU2-5M SFP+ 10G DAC cable at an affordable price, providing a cost-effective compatible solution for high-performance 10G connectivity.

 

Featured with lower latency, lower power consumption, and lower cost, this 10G SFP+ passive direct-attach copper Twinax cable is widely applied in data centers for high-performance computing network cabling systems.

 

Part Number

FT-SFPP-PC2.5

Vendor Name

F-tone

Connector Type

SFP+ to SFP+

Data Rate

10 Gbps

Minimum Bend Radius

23mm

Wire AWG

30AWG

Cable Length

2.5m

Cable Jacket

PVC (OFNR)

 

Model Contrast Table

Part Number FT-SFPP-PCx FT-SFPP-ACx FT-SFPP-Ax
Cable Type Passive Direct Attach Copper Active Direct Attach Copper Active Optical Cable
Max Data Rate 10Gbps 10Gbps 10Gbps
Connector Type SFP+ to SFP+ SFP+ to SFP+ SFP+ to SFP+
Wire AWG 30AWG 26/28AWG /
Minimum Bend Radius 23mm 30mm 7.5mm
Media Copper Copper Optic Fiber
Jacket Material PVC (OFNR) PVC (OFNR) LSZH

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us