ClearCut kW Package-Free Fiber Bragg Grating
The ClearCut kW Package-Free Fiber Bragg Grating products are ultra low insertion loss fiber bragg gratings for high power fiber lasers. With F-tone's ClearCut design and special process, the FBG can handle kilowatt level pump power and signal power with recoated only.
|
Key Features |
Applications |
|
High Power Handling |
Fiber Laser |
|
Low Temperature Slope |
|
|
Exceptional Reliability |
|
Parameter |
Unit |
Value |
|||
|
Center Wavelength |
nm |
1018, 1030, 1064, 1070, 1080, 1090 |
|||
|
Tolerance on Center Wavelength |
nm |
± 1.0 |
|||
|
Max. Wavelength Mismatch (OC Relative HR) |
nm |
0.2 |
|||
|
High Reflector (HR) / Output Coupler (OC) |
/ |
HR |
OC |
||
|
Peak Reflectivity |
% |
≥ 99.0 |
(5.0 - 30.0) ± 2.0 |
||
|
Reflection Bandwidth at 95% |
nm |
1.5 - 4.0 |
/ |
||
|
Reflection Bandwidth at 50% |
nm |
/ |
0.2 - 2.0 |
||
|
Tolerance on Reflection Bandwidth |
nm |
0.1 - 0.4 |
0.1 - 0.2 |
||
|
Min. Side Mode Suppression Ratio |
dB |
20 |
10 |
||
|
Fiber Core/Cladding Dimension |
μm |
10/125 |
14/250 |
20/400 |
25/400 |
|
Temperature Slope Suspended in Air 1 |
℃/W |
≤ 0.1 |
≤ 0.03 |
≤ 0.02 |
|
|
Max. Core Signal Power Handling 2 |
W |
300 |
1000 |
3000 |
|
|
Max. Clad Pump Power Handling |
W |
450 |
1500 |
3000 |
|
|
Fiber Type |
/ |
PM or Non-PM |
|||
|
Recoating Length |
mm |
40 - 60 |
|||
|
Storage Temperature |
℃ |
- 40 to + 85 |
|||
2The grating area should be kept on active cooling plates. (The cooling temperature ≤ 25 ℃)
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
-
Совместимость с AVAGO HFBR-1414TZ Оптическое волокно 850 нм Высокопроизводительное оптоэлектронное передающее устройство DC-50 Мбод
Обычная цена $0.00Обычная цена -
Совместимость с AVAGO AFBR-2418TZ Оптическое волокно 850 нм Высокопроизводительное оптоэлектронное приемное устройство DC-50 Мбод
Обычная цена $0.00Обычная цена -
AVAGO HFBR-1412TZ Совместимое оптоволокно 850 нм Высокопроизводительное оптоэлектронное приемопередающее устройство DC-5 Мбод
Обычная цена $0.00Обычная цена -
AVAGO HFBR-2412TZ Совместимое оптоволокно 850 нм Высокопроизводительное оптоэлектронное приемопередающее устройство DC-5 Мбод
Обычная цена $0.00Обычная цена
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
Совместимый с Cisco 10GBASE-BX20-D BiDi SFP+ 1330 нм-TX/1270 нм-RX 20 км DDM Simplex LC SMF модуль трансивера
Обычная цена $0.00Обычная цена -
AVAGO HFBR-1521Z Совместимое оптоволокно 650 нм Высокопроизводительное оптоэлектронное приемопередающее устройство DC-5 Мбод
Обычная цена $0.00Обычная цена -
AVAGO HFBR-1521Z Совместимое оптоволокно 650 нм Высокопроизводительное оптоэлектронное приемопередающее устройство DC-5 Мбод
Обычная цена $0.00Обычная цена -
AVAGO HFBR-1521Z Совместимое оптоволокно 650 нм Высокопроизводительное оптоэлектронное приемопередающее устройство DC-5 Мбод
Обычная цена $0.00Обычная цена
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.