Перейти к информации о продукте
1 из 2

Heat Shrinkable Fiber Optic Splice Protector Single Fiber 1.5x60mm 100pcs/pkg

Heat Shrinkable Fiber Optic Splice Protector Single Fiber 1.5x60mm 100pcs/pkg

Просмотреть всю информацию

Part Number: FT-1560C

Heat Shrinkable Fiber Optic Splice Protector 1.5x60mm 100pcs/pkg

Description

Consist of a rod of reinforcing the splice, hot fusion tubing and cross-linked polyolefin. To rebuild the coating of fiber to provide mechanical strength at the fusion joint area and keep optical transmission properties.

Product Structure

Features

  • Moisture resistant for environmental protection.
  • Clear sleeve make it easy to detect splice before shrinkage
  • Easily use and avoid any damages to the optical fiber during installation
  • Color optical fiber splice protector is very convenience for installation.
  • Operating temperature (-45°C~100°C)
  • Minimum shrink temperature :60°C.
  • Minimum fully recovery temperature : 100°C.

Ordering Information

Type Length of tube Hot-melt tube Steel needle
After recover Length(mm) Inside dia Length(mm) Inside dia Length(mm)
FT-1560C 3.1±0.1 60 1.4 60 1.5 55

Quantity per package: 100pcs/pkg

Note: We also provide this kind of protection sleeves with 1000pcs/pkg and good price.

Fiber optic splice protection sleeves are used for optical fiber fusion protection, it can protecting and supporting the fusion splice point. F-tone.com now provides different sizes and materials of this kind of products. And if you can not find the fiber optic splice sleeves you need on our website, welcome to contact us, we will give you a reasonable suggestion.


This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.