Part Number: FT-24F-MMC-SMF
MMC-24 OS2 SingleMode Trunk Cable 24-576 Fibers LSZH
The MMC fiber cable is equipped with an MMC connector, a Very Small Form Factor (VSFF) multi-fiber optical connector designed to terminate single-mode and multimode fiber cables up to 2.5mm in diameter. It employs novel TMT ferrule technology harmonized with the MT/MT-16 alignment structure. Individual connector access in the most extremely dense connector environments is easily accomplished using revolutionary DirectConec™ push-pull boot technology.
MMC connectivity enables solutions that minimize the space required across multiple applications, including structured cabling, high fiber count data center interconnects, and high-bandwidth applications.
3x Higher Cabling Density Than MPO
MMC connectors offer three times the cabling port density of MPO, thanks to their space-saving design.
Significant Space Saving for Cabling
Features
Reliable transmission guaranteed due to Exquisite Design
High-performance US Conec MMC connectors ensure reliable connectivity for high-density data centers and carrier-grade applications.
Minimum Insertion Loss and Return Loss
Brand-new Push-pull Boot Design
Specifications
| Connector A | US Conec MMC | Connector B | US Conec MMC |
|---|---|---|---|
| Polish Type | APC/UPC | Glass Fiber | G.657.A1 |
| Fiber Mode | OS2 9/125μm | Wavelength | 1310/1550nm |
| Fiber Count | 24-576 Fibers | Polarity | Trunk/ Extender Polarity |
| Cable Outside Diameter (OD) | 4.0-18.0mm | Cable Jacket | Plenum (OFNP)/LSZH |
| Min. Bend Radius (Optical Fiber) | 10mm | Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 200-400N | Tensile Strength (Short Term) | 660-1320N |
| Insertion Loss | ≤0.35dB | Return Loss | ≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km | Attenuation at 1550nm | <0.21dB/km |
| Operating Temperature | -10 to 60°C (14 to 140°F) | Storage Temperature | -10 to 70°C (14 to 158°F) |
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
-
Совместимость с AVAGO HFBR-1414TZ Оптическое волокно 850 нм Высокопроизводительное оптоэлектронное передающее устройство DC-50 Мбод
Обычная цена $0.00Обычная цена -
Совместимость с AVAGO AFBR-2418TZ Оптическое волокно 850 нм Высокопроизводительное оптоэлектронное приемное устройство DC-50 Мбод
Обычная цена $0.00Обычная цена -
AVAGO HFBR-1412TZ Совместимое оптоволокно 850 нм Высокопроизводительное оптоэлектронное приемопередающее устройство DC-5 Мбод
Обычная цена $0.00Обычная цена -
AVAGO HFBR-2412TZ Совместимое оптоволокно 850 нм Высокопроизводительное оптоэлектронное приемопередающее устройство DC-5 Мбод
Обычная цена $0.00Обычная цена
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
Совместимый с Cisco 10GBASE-BX20-D BiDi SFP+ 1330 нм-TX/1270 нм-RX 20 км DDM Simplex LC SMF модуль трансивера
Обычная цена $0.00Обычная цена -
AVAGO HFBR-1521Z Совместимое оптоволокно 650 нм Высокопроизводительное оптоэлектронное приемопередающее устройство DC-5 Мбод
Обычная цена $0.00Обычная цена -
AVAGO HFBR-1521Z Совместимое оптоволокно 650 нм Высокопроизводительное оптоэлектронное приемопередающее устройство DC-5 Мбод
Обычная цена $0.00Обычная цена -
AVAGO HFBR-1521Z Совместимое оптоволокно 650 нм Высокопроизводительное оптоэлектронное приемопередающее устройство DC-5 Мбод
Обычная цена $0.00Обычная цена
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.