1 1

4 Channel Video & 1channel Return Data & 4 channel Forward Audio & Ethernet to Fiber SM 20km Optical Video Multiplexer

4 Channel Video & 1channel Return Data & 4 channel Forward Audio & Ethernet to Fiber SM 20km Optical Video Multiplexer

Просмотреть всю информацию

Part Number: FT-4V1D4A1E-SM-20

4 Channel Video & 1channel Return Data & 4 channel Forward Audio & Ethernet to Fiber SM 20km Optical Video Multiplexer

Descriptions

  • Model:FT-4V4A1D1E-SM-FC-20KM
  • Transmitter + Receiver
  • Fiber Mode: Single-Mode
  • Wavelengths: 1310nm/1550nm
  • Optical Power Budget: 12dB
  • Maximum Transmission Distance: 20km
  • Standalone- (Insert card version also available ,which can be inserted into our 16-slot, 19inch 2U or 4U rack-mountable card cage).
  • Standard Single-Mode 20KM- (Multimode also available, which support for distances up to 2.0 km)

Key Features

  • Support Point-to-Point or Daisy-Chain connection
  • Uncompressed Digital Composite Video over one fiber
  • Compatible with all PAL, NTSC,SECAM Video Systems
  • Data support RS485(2-wire or 4-wire),RS232,RS422, Contact Closure
  • Single-Mode Fiber Support for Distances up to 100 km
  • LED Status Provide Rapid Indication of Operating Parameters
  • No EMI or RFI and no ground loops
  • Support Coarse Wavelength Division Multiplexing (CWDM)
  • Stand alone
  • Produce according to customer's specifications,providing OEM

Picture Details




Technical Specifications

VIDEO CONNECTORS
Number of Channels 1, 2, 4, 8, 16, 24, 32, 48, 64 optional Video 75Ω BNC (Gold Center Pin)
Input/output impedance BNC 75Ω Optical FC Standard; ST/SC optional
Input/output Compatibility PAL,NTSC,SECAM Audio Terminal Block
Input/output voltage 1.0 Volt p-p Data Terminal Block
Bandwidth 6.5MHZ Standalone power Screw terminal block
Bit Resolution 8-Bit Digital Transmission Rack Power AC line card
Differential Gain < 1.5% ELECTRICAL & MECHANICAL
Differential Phase < 1.5° Input Power Requirements DC 5V@2A
Tilt < 5% Power Adapter AC 100V~240V
Signal-to-Noise Ratio(SNR) > 67 dB Power Consumption < 3W
AUDIO Bit Error Rate 1.00E-08
Number of Channels 1, 2, 4, 8, 16 optional DATA
Audio in/output impedance 600Ω Unbalanced Number of Channels 1, 2, 4, 8, 16 optional
Audio in/output Level 6 dBm Interface Port RJ45
Signal-to-Noise Ratio (SNR) >80 dB Data Formats RS485(2-wire or 4-wire), RS232, RS422, Contact Closure
Bit Resolution 24-Bit Data Rate DC to 115.2Kbps
Bandwidth 20Hz~20KHz Bit Error Rate 1.00E-08
ENVIRONMENTAL ETHERNET/IP
Operating Temperature -45 °C~ +75 °C Standard Ethernet IEEE 802.3 (Auto-Negotiation)
Relative Humidity 0%~95% (non-condensing) Data Rate 10/100 Mbps
Storage Temperature -45 °C~ +85 °C Connector RJ-45, Auto MDI/MDI-X
MTBF >100,000 hours




This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us