Перейти к информации о продукте
1 из 1

FT-E130T EPON OLT with 1-PON Ports and 1-Uplink Ports

FT-E130T EPON OLT with 1-PON Ports and 1-Uplink Ports

Просмотреть всю информацию

Part Number: FT-E130T

EPON OLT with 1-PON Ports and 1-Uplink Ports

Key Features

FT-E130T is a small scale office end OLT device of FTTX telecommunication level independently researched and developed by F-tone Company; it conforms to IEEE802.3-2005 standard; it can provide user with access to comprehensive services such as broadband, voice, IPTV and CATV.

Strong QOS function

Our EPON system supports maximum 256 Logical Link Identifier (LLID); supporting Dynamic Bandwidth Allocation (DBA) and uplink and downlink traffic rate-limited, minimal and maximal bandwidth control and different stream weighting coefficient to fully guarantee QOS.

Rich OAM function

Our FT-E130T OLT supports auto-discovery, auto identification and auto-register, user line testing, remote ONU fiber failure and power failure alert. It also support flexible controllable multicasting, support IGMP snooping.

Specifications:

Parameters Specifications
Wavelength (nm) 1310(RX)/1490(TX)
Transmission Distance (km) 20
MAC Address Table 4K MAC address list (Uplink port supports electronic port modules and optical port modules, which can be configured flexibly as required)
MTBF (hrs) 100,000
Product Features 1. 1U case,Good shielding measures
2. Layer 2 aggregation switching
3. Layer 2 wire-speed forwarding
4. support rich layer 2 protocols
Protocols 1. IP ToS
2. IEEE802.1p priority
Network Management 1. Support in-band management, out-of-band management
2. Support online upgrade of device software
Port features 1. 1 PON ports (1.25G)
2. 1 uplink ports (1G) (electronic ports and optical ports options)
3. 1 management ports (special software management)
4. 1 console port
Power Consumption DC (5V/4A) (20W)
Operating Temp. (°C) 0℃~+45℃
Storage Temp. (°C) -30℃~+60℃
Storage Humidity 10℃~+90℃ ;non-condensing
Rack Dimensions (mm) 440(L) x 207(W) x 43.6(H)

Note: This device is without PON Module and Uplink Module.

Parameters Specifications
Wavelength (nm) 1310(RX)/1490(TX)
Transmission Distance (km) 20
MAC Address Table 4K MAC address list (Uplink port supports electronic port modules and optical port modules, which can be configured flexibly as required)
MTBF (hrs) 100,000
Product Features 1. 1U case,Good shielding measures
2. Layer 2 aggregation switching
3. Layer 2 wire-speed forwarding
4. support rich layer 2 protocols
Protocols 1. IP ToS
2. IEEE802.1p priority
Network Management 1. Support in-band management, out-of-band management
2. Support online upgrade of device software
Port features 1. 1 PON ports (1.25G)
2. 1 uplink ports (1G) (electronic ports and optical ports options)
3. 1 management ports (special software management)
4. 1 console port
Power Consumption DC (5V/4A) (20W)
Operating Temp. (°C) 0℃~+45℃
Storage Temp. (°C) -30℃~+60℃
Storage Humidity 10℃~+90℃ ;non-condensing
Rack Dimensions (mm) 440(L) x 207(W) x 43.6(H)



This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.