Перейти к информации о продукте
1 из 1

FT-E8010U-N with 1-PON port, 1 10/100M port and 1 10/100/1000M port

FT-E8010U-N with 1-PON port, 1 10/100M port and 1 10/100/1000M port

Просмотреть всю информацию

Part Number: FT-E8010U-N

1-PON port, 1 10/100M port and 1 10/100/1000M port

Introduction

FT-E8010U-N type ONU products fully comply with IEEE 802.3ah. It is operative, manageable and maintainable at telecommunication level, and can provide high speed data service for customers. It has a PON uplink port that connects to office end apparatus through optical fiber.

Product Features

Conform to IEEE802.3ah standardSupport Ethernet service layer 2 switching and wire-speed forwarding of uplink and downlink servicesSupport frame filtering and suppressionSupport standard 802.1Q Vlan function, support VLAN conversionSupport 4094 VLANs (802.1Q)Support Dynamic Bandwidth Allocation (DBA) functionSupport QoS, including traffic flow classification, priority marking, queue and dispatch, traffic shaping and traffic control, etc.Single ONU supports up to 8 LLIDSupport IGMP Snooping
Support Ethernet port ratelimit loop detectionSupport power failure alarmSupport lightning protection for power supply and lightning protection for service port

Port Features

1 PON ports (1.25G)1 10/100/1000M port1 10/100M port

Physical Features

Power supply: 12VDCPower consumption: 6W

Temperature

Working temperature:0~55℃Storage temperature: -30~60℃Relative humidity: 10~90% (non-condensing)

TechnicalItems Descriptions
Ports 1PONports(1.25G)110/100Mport110/100/1000Mport
Powersupply 12VDC
Powerconsumption 6W
Workingtemperature 0~55℃
Storagetemperature -30~60℃
Relativehumidity 10~90%(non-condensing)




This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.