1 2

Generic Compatible 400GBASE-DR4 OSFP IHS/Closed Finned Top PAM4 1310nm 500m Transceiver Module - F-tone

Generic Compatible 400GBASE-DR4 OSFP IHS/Closed Finned Top PAM4 1310nm 500m Transceiver Module - F-tone

Просмотреть всю информацию

Transceivers Type

SFP Optical Transceiver

Specifications

Generic Compatible 400GBASE-DR4 OSFP Closed Finned Top PAM4 Optical Transceiver Module (1310nm, 500m, Single-Port MPO-12/APC Connector, SMF, 0℃ to +70℃, DDM)

 

The Generic compatible 400GBASE-DR4 OSFP is a closed finned top transceiver module designed with Integrated Heat Sink (IHS) for use in 400 Gigabit Ethernet links up to 500m over OS2 singlemode fiber (SMF). It supports a max data rate of 425 Gbps with a single 4-channel MPO-12 APC optical connector. Adopting the Pulse-amplitude Modulation (PAM4) electrical and optical modulation, the Datacenter Reach 4-channel (DR4) OSFP achieves 400 Gigabit Ethernet through 4-channels of 100G-PAM4. F-tone manufactured DR4 OSFP complies with 400G Ethernet, OSFP MSA, CMIS 4.0, RoHS, IEEE 802.3bs. The DDM (digital diagnostics monitoring) function is supported on the 400G fiber optic transceiver to achieve real-time operating parameters monitoring. 

 

The 400G DR4 OSFP-IHS is for Ethernet air-cooled switches and support 400G to 4x 100GBASE-DR breakout application.

 

Part Number FT-OSFP-400G-DR4-IHS Vendor Name F-tone
Form Factor Single-port OSFP-IHS/Closed Finned Top Max Data Rate 425Gbps (4x 106.25Gbps)
Wavelength 850nm Distance 500m over G.652 SMF
Connector MTP/MPO-12/APC Cable Type MMF
Transmitter Type EML Receiver Type PIN PD
TX Power -2.9 to 4 dBm Receiver Sensitivity < -5.9 dBm
Packaging Technology COB (Chip on Board) Packaging Receiver Overload 4 dBm
Power Consumption ≤8W Modulation Format 8x 50G-PAM4 electrical to 4x 100G-PAM4 optical Parallel
DDM/DOM Supported Temperature 0 to 70°C (32 to 158°F)
Protocols 400G Ethernet, OSFP MSA, CMIS 4.0, RoHS, IEEE 802.3bs Warranty 5 Years

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us