
Transceivers Type
SFP28 Optical Transceiver
Specifications
Juniper SFP28-25G-LW09.14 Compatible 25G LWDM SFP28 DOM Optical Transceiver Module for 5G front-haul Telecom (SMF, 1309.14nm, 40km, LC, DOM)
F-tone's 25G LWDM SFP28 transceiver adopted DML+ETC on TX, and it can work at its optimal working temperature to enhance reliability. 25G SFP28 LWDM transceivers do not have to use expensive EML lasers but can be implemented with relatively cheap DML lasers to maintain stable transmission and save construction costs. Meanwhile, LWDM’s working wavelengths are located at intervals of 800GHz with near zero dispersion. It can save the cost of DCM. In summary, 25G LWDM transceiver is the best choice of 5G front-haul. The 25G LWDM Optical Transceiver needs to be used with LWDM Mux/Demux. F-tone can supply all the products for users.
| Part Number: |
SFP28-25G-LW09.14 |
Vendor Name |
F-tone |
| Form Factor |
SFP28 |
Data Rate: |
25Gbps |
| Wavelength: |
1309.14nm |
Distance: |
- |
| Connector |
LC Duplex |
Cable Type |
OS2 SMF |
| Transmitter: |
DML |
Receiver Type: |
APD |
| TX Power |
0~+6dBm |
Receiver Sensitivity |
<-19dBm |
| Power Consumption: |
≤1.5W |
Modulation Format: |
NRZ |
| DDM: |
Supported |
Bit Error Ratio (BER): |
1.00E-12 |
| Protocols: |
MSA Compliant, CPRI, eCPRI |
Warranty: |
5 Years |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
