• kl-280g
1 1

KL-280G FUSION SPLICER

KL-280G FUSION SPLICER

Просмотреть всю информацию

Part Number: KL-280G

KL-280G FUSION SPLICER

Fusion splicer KL-280 features a rubberized design for field use in harsh weather conditions.The fusion splicer has a friendly, intuitive GUI (Graphical user Interface) with a 5.7 inch color LCD screen that is easy to see and is adjustable for front and rear splicer orientation. The fusion splicer can 9 seconds splice time and 30 seconds heat time. The sizeable, large battery capacity at full charge allows for up to 400 splices.

If you can’t find what you are looking for, please contact us.

Key Features

  • Core to core alignment by PAS technology (PAS: Profile Alignment System)
  • Fiber core can be display clearly
  • Single X or Y view and X & Y view simultaneously
  • Auto check quality of cleaved end face
  • 5.7 inch TFT color LCD monitor with clear digital image display USB & VGA interface
  • Software upgrade via USB interface

Specification

Applicable fibers SM MM DS NZDS
Fiber diameter Cladding diameter: 80- 150μm;Coating diameter: 100-1000μm
Fiber count Single
Fiber cleaved length 12-16mm (Coating diameter:250μm)
Actual average splice loss 0.02dB(SM) ,0.01dB(MM) ,0.04dB (DS) ,0.04dB (NZDS)
Typical splicing time Typical 9 sec (standard SM fiber)
Return loss >60dB
Splicing mode Auto Calibrate Normal Special
Fiber aligning method Meticulous,Core,Clad,Manual
Splicing program 53 (templet), 40(user)
Tube heating program 9 (templet),24(user)
Tube typical heating time Typical 30 sec
Protection sleeve length 60mm , 40mm
Storage of splice result 4000 results , 20 parameter per result
Fiber image magnification 300X (X or Y view),150X (X and Y view)
Battery capacity Typical 400 cycles (splice/tube heaty)
Monitor 5.7 inch TFT color LCD monitor
Tension test 2N
Electrode life 2500
Terminal USB
Power supply AC 100-240V with AC adapter
Inner Li-battery (5200mAh)
Operating condition 0-5000m above sea level , -10- 50°
Max wind velocity of 15m/s
Dimension 150mm(L)×150mm(W) ×150mm(H)
Weight 2.55Kg including battery

Function Comparision of Jilong Fusion Splicer

Function KL-280G KL-280 KL-300T KL-500
Display fiber cleaved angle - - ● ●
Display fiber offset angle - - ● ●
Display core offset - - ● ●
Display clad offset - - ● ●
Splicing mode (Auto, Calibrate ,Normal ,Special) ● - ● ●
Fiber aligning method (Core 、 Clad 、 Manual) ● - ● ●
Arc strength automatic adjustment ● - ● ●
Image turn over - ● ● ●
Fiber angle limit - - ● ●
Display inside temperature - - ● ●
Display ambient temperature - - ● ●
Display heater temperature - - ● ●
Display air pressure - - ● ●
Display battery voltage - - ● ●
Taper splice - - ● ●
Sleep - - ● ●
Auto shut down - - ● ●
Software upgrade via USB interface ● - ● ●

( ● means YES , - means NO )


This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us