Перейти к информации о продукте
1 из 1

3M(9.8ft) 40GBASE QSFP+ to LC Connector(8) Breakout Active Optical Cable

3M(9.8ft) 40GBASE QSFP+ to LC Connector(8) Breakout Active Optical Cable

Просмотреть всю информацию

Part Number: QSFP-8X-AOC-3X

Active Optical Breakout Cable 40GBASE QSFP+ to LC Connector(8) 3M(9.8ft)

40GBASE QSFP+ to eight LC/SC/ST/FC Connector Breakout Active Optical Cable are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE-SR4. QSFP+ Breakout Cable is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s. QSFP+ Breakout Cable are suitable for short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable.
All our 40GBASE QSFP+ to LC/SC/ST/FC Connector(8) Breakout Active Optical Cable are 100% compatible with major brands like Cisco, Juniper, Enterasys, Extreme, H3C and so on. If you would like to order high quality compatible 40GBASE QSFP+ to LC Connector(8) Breakout Active Optical Cable and get worldwide delivery, we believe F-tone.COM is your best choice.

Specifications

  • Connector 1: QSFP+
  • Connector 2: 8 x LC/SC/ST/FC Connector
  • Length: 3 meters
  • Cable Type: AOC Cable
  • Full duplex 4 channel 850nm parallel active optical cable
  • Transmission data rate up to 10.3Gbit/s per channel
  • SFF-8436 QSFP+ compliant housing and hot pluggable electrical interface.
  • Management Interface and digital diagnostic monitoring(DDM) through I2C
  • Support Rx output pre-emphasis
  • 4ch 850nm VCSEL array
  • 4ch PIN photo detector array
  • Helix type multi-mode optical fibre cable of up to 100m
  • OFNP (Optical Fibre Non-Conductive Plenum) rated cable
  • Differential AC-coupled high speed data interface
  • Housing isolated from connector ground
  • Operating Temperature: 0 to 70℃
  • RoHS 6 compliant
  • 3.3V power supply voltage

Applications

  • Infiniband transmission at 4ch SDR(2.5Gbit/s), DDR(5Gbit/s) and QDR(10Gbit/s)
  • Multi-channel 10Gb Ethernet transmission up to 4 channels
  • Fiber Channel transmission at 8.5Gbit/s per channel, up to 4 channels
  • QSFP+ to LC/SC/ST/FC cables with MT connectors for plugging into existing cable runs or patch pannels
  • Creating a breakout cable with four Duplex LC connectors for port expander applications
  • SDR /DDR /QDR
  • Data Centers

Datasheet

Part Number Data Rate Fibers Port
10GSFP-AOC-XFM 10G OM2/OM3 SFP+
SFP28-25G-AOC-XFM 25G OM2/OM3 SFP28
QQ-AOC-XFM 40G OM3 QSFP+
QSFP4S-AOC-XFM 40G OM3 QSFP+ to SFP+
QSFP-8X-AOC-XFM 40G OM3 QSFP+ to LC
QSFP-56G-AOC-XFM 56G OM3 QSFP+
QSFP-100G-AOC-XFM 100G OM3/OM4 QSFP28
QSFP28-AOC-4SFP28-XFM 100G OM3/OM4 QSFP28 to SFP28

Quality Certification

Quality and standards are the foundation of F-tone. we are dedicated to providing customers with outstanding, standards-compliant products and services. F-tone has passed many quality system verifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.

Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.

Ordering Information

Part No. Data Rate Length Cable Type Connector Type Temp. Range
QSFP-8X-AOC-1 Up to 40G 1m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃
QSFP-8X-AOC-2 Up to 40G 2m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃
QSFP-8X-AOC-3 Up to 40G 3m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃
QSFP-8X-AOC-4 Up to 40G 4m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃
QSFP-8X-AOC-5 Up to 40G 5m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃
QSFP-8X-AOC-6 Up to 40G 6m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃
QSFP-8X-AOC-7 Up to 40G 7m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃
QSFP-8X-AOC-8 Up to 40G 8m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃
QSFP-8X-AOC-9 Up to 40G 9m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃
QSFP-8X-AOC-10 Up to 40G 10m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃

Notes

  • Custom 40GBASE QSFP+ to LC/SC/ST/FC Connector(8) Breakout Active Optical Cable are available in various lengths and other options.
  • xx means compatible brand. (For example: CO= Cisco, JU=Juniper, FD=Foundry, EX=Extreme, NE=Netgear,etc. The two characters are short for compatible brand.)
  • X means LC,SC,ST or FC Connector.

Packaging

  • Packed with antistatic bag in a box(Default Customer Options)

This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.