1 2

S5300-8P2S, 8-Port Fanless Gigabit Ethernet L2+ Network Switch 130W, with 1Gb SFP Uplinks - F-tone

S5300-8P2S, 8-Port Fanless Gigabit Ethernet L2+ Network Switch 130W, with 1Gb SFP Uplinks - F-tone

Просмотреть всю информацию

Transceivers Type

SFP Optical Transceiver

Compatible

200+ Vendors\t\t\t\t\t\t\t\n5. Hot Pluggable SFP MSA Compliant","remark":"

Specifications

S5300-8P2S, 8-Port Gigabit Ethernet L2+ Active 802.3af/at PoE+ Managed Switch for SMBs, 8x 10/100/1000BASE-T RJ45 PoE+ Ports @130W, with 2x 1G SFP Uplinks, Fanless, Up to 100M Transmit, Support ERPS

 
The S5300-8P2S 8-port gigabit switch has 8x 10/100/1000BASE-T RJ45 PoE ports and 2x 1Gb SFP uplink ports. The 8x RJ45 ports support IEEE802.3af/at (up to 30W by a single port) PoE/PoE+ standards and can be used in IP phones, wireless access points, or other end network devices standards-compliant PoE, PoE+. Its fanless design features power-saving and ultra-silent operation, which caters to noise-sensitive environments, such as working offices, homes, libraries, schools, etc. The small 8-port fanless switch can be flexibly used as a desktop or rackmount switch.
 
As an L2+ Ethernet-managed access layer switch, it supports static routing, RIP, OSPF, etc. S5300-8P2S can be easily controlled and managed through SNMP, CLI, WEB, SSH, allowing for real-time monitoring and improved management efficiency. Also, multiple security features such as anti-attack from DDoS, TCP/UDP Flood, IEEE 802.1x, Radius, Tacacs+, etc safeguard your network robustness. S5300 series 8 port switch enables non-professional technical personnel to operate networks with a simple, flexible and secure solution, ideal for deployment in small to medium businesses and enterprise networks.
 
Part Number S5300-8P2S Vendor Name F-tone
Ports 8x 10/100/1000BASE-T RJ45 PoE+ | 2x 1G SFP Packet Buffer 512 KB
Switching Capacity 20 Gbps Forwarding Rate 15 Mpps
MAC Address 8K DRAM 128 MB
VLAN IDs 4K Jumbo Frame 9K
Flash Memory 16 MB DRAM 128 MB
Noise 0 dbM Fan Fanless
Input Voltage 100 to 240 VAC, 50 to 60 Hz Power Supply 1 built-in AC power supply (default), DC optional
Stackability None Fan Fanless
Power Consumption 142W (full-load); 7W (no-load) MTBF > 50,000 hours
Operating Temperature -10 to 45℃ (14 to 113℉) Weight 2.1 kg
Dimensions (H x W x D) 44 x 280 x 180 mm
(1.73 x 11.02 x 7.09'') 		Warranty 5 years
 

Model Contrast Table

Model S5300-8P2S S5300-24P4TS S5300-24P4X S5300-48P6X S5310-48P6X
RJ45 Ports 8x 10/100/1000BASE-T 24x 10/100/1000BASE-T 24x 10/100/1000BASE-T 48x 10/100/1000BASE-T 48x 10/100/1000BASE-T
Fiber Ports 2x 1G SFP 4x 1G RJ45/SFP Combo 4x 10G SFP+ 6x 10G SFP+ 6x 10G SFP+
PoE IEEE 802.3af/at IEEE 802.3af/at IEEE 802.3af/at IEEE 802.3af/at IEEE 802.3af/at
Management Layer L2+ Managed L2+ Managed L2+ Managed L2+ Managed L3 Managed
Power Supply 1 Built-in AC Power Supply 1 Built-in AC Power Supply 1 Built-in AC Power Supply 1 + 1 Redundant Power Supplies (1 Built-in AC + 1 Built-in DC) 1 Hot-Swap AC Power Supply (default)
1+1 Redundant Power Slots, DC Optional
Fan Fanless 3 Built-in Fans 2 Built-in Fans 2 Built-in Fans 3 Built-in Fans
Stackability / / 2 Units 8 Units 8 Units
Data Link Layer QinQ, GVRP QinQ, GVRP QinQ, GVRP QinQ, GVRP QinQ, GVRP
Routing Static routing, RIP, OSPF Static routing, RIP, OSPF Static routing, RIP, OSPF Static routing, RIP, OSPF Static routing, RIP v1/v2, OSPF, BGP
Security IGMP Snooping, DHCP Snooping, DAI, Port security IGMP Snooping, DHCP Snooping, DAI, Port security IGMP Snooping, Port security, DAI, DHCP snooping IGMP Snooping, Port security, DAI, DHCP snooping IGMP Snooping, DHCP snooping, Port security
IPv6 IPv4/v6 dual stack IPv4/v6 dual stack IPv6 Static Routing, RIPng,
OSPFv3		 IPv6 Static Routing, RIPng,
OSPFv3		 IPv6 Static Routing, RIPng, OSPFv3, BGP4+
Reliability QoS, ISSU QoS, ISSU QoS, VRRP, ISSU QoS, VRRP, ISSU BFD, QoS, LLDP, VRRP, PBR

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

Посмотреть все

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

Посмотреть все

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us