Перейти к информации о продукте
1 из 1

Handheld Adjustable Optical Light Source ST-3116 (1310/1550nm adjustable)

Handheld Adjustable Optical Light Source ST-3116 (1310/1550nm adjustable)

Просмотреть всю информацию

Part Number: ST-3116-1

Handheld Adjustable Optical Light Source ST-3116 (1310/1550nm adjustable)

Description

ST-3116 Handheld Adjustable Light Source is F-tone newly designed fiber optic tester, it aims at fiber network installation, fiber network engineering acceptance and fiber network maintenance. Combined usage with ST-3216 handheld optical power meter, it offers a quick and accurate testing solution on both SM and MM fibers. The ST-3116 provides 1 to 4 wavelengths and output power can be adjustable on customer requests. Also the ST-3116 features good appearance, good touch feeling and considerate humanity design.

Note: Together with 2.5mm UPP adapter, FC, SC, ST are all interchangeable.
SC adapter means FC male to SC female fiber adapter.
ST adapter means FC male to ST female fiber adapter.
LC adapter means FC male to LC female fiber adapter.

Features

Wave ID information can be transmitted when used with ST-3216 Optical PowerMeter.
Tone generation, 270HZ,330HZ,1KHZ,2KHZ
Output power can be adjustable
Output power value is shown on LCD display
Intelligent backlight control (light intensity can be adjusted properly according to ambient light, which greatly reduced power consumption)
AA alkaline and AC adapter for power supply
Low battery indication

Standard Packages

Model Includes
All ST-3116 Models ST-3116 Optical Light Source, 3pcs 1.5V batteries, AC Adaptor, User Manual, Cotton swabs and Soft carrying case.

Kind Note

This price is only for the two wavelength(1310/1550nm) light source, and it can be adjusted between -5~-12.
We provide FC, ST, SC Connector for choose. If no special requirement, we will send you the FC connector. If you need more than one connector, please contact our sales at [email protected] for more details.
F-tone can supplies lots kinds of fiber optic light sources and all with high quality and 100% tested before the delivery. If you need this ST-3116 optical light source at a large quantity or have any problems or special requirement, just feel free to contact us, we will do our best to serve you.

Model ST-3116
Operating wavelength(nm) 1310/1550;1310/1490/1550/1625 (others specify on requests)
Applicable fiber SM,MM
Laser type FP-LD(others specify on requests)
Output Power(dBm) -7(can be adjustable)
Adjustable step size(dBm) <0.5
Stability(dB,30min,20℃) 0.15
Modulation(Hz) CW,270,330,1K,2K
Fiber Port FC/PC
Alkaline Battery 3*AA,1.5V
Power Supply Adaptor(V) 8.4
Battery Operating time(h) 45 without backlight
Operation Temperature(℃) -10~+60
Storage Temperature(℃) -25~+70
Dimension(mm) 180*90*45
Weight (g) 250




This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.