Feature:
- Single mode single fiber BIDI Optical Module
- Transmitter section Selects 1310nm FP and 1550nm FP/DFB Laser
- Standard+3.3V/or+5V Power Supply
- SC/FC/ST receptacle optical interface and pigtail opticalinterface
- Standard TTL data output with signal detect indication,compatible with CMOS level
- Standard1×9 package
- Super low power consumption,applied to some special requirement
- Optional transmission bit rate with down to 0Mbpsand up to 10Mbps
Application
- RS232/RS485/RS422 receptacle fiber transmission
- Industrial control with bit rate up to DC 10Mbps
- Electric power control
- Other optic link
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit |
| Supply Voltage | Vcc | 0 | +3.5 | V |
| 0 | +6 | |||
| Storage Temperature | Ts | -40 | +85 | ℃ |
| Relative Humidity | RH | 5 | 95 | % |
| Lead soldering temperature | T | – | 260 | ℃ |
| Lead Wire Soldering Time | t | 10 | S |
Recommended Operating Environment:
| Parameter | Symbol | Min. | Typical | Max. | Unit | |
| OperatingTemperature | Industrial | Tc | -40 | – | +85 | ℃ |
| Commercial | 0 | – | +70 | ℃ | ||
| Supply Voltage | Vcc | 3.15 | 3.3 | 3.45 | V | |
| 4.75 | 5 | 5.25 | ||||
| Supply Current | Icc | – | – | 61 | mA | |
| Data rate | B | DC | – | 10 | Mbps | |
Specifications(T=25℃,VCC=4.75~5.25V(+5V)OrVcc=3.1~3.5V(+3.3V)
Transmitter
| Parameter | Symbol | Min. | Typical | Max. | Unit | |
| CentreWavelength | FTTR-B13L2-xxxx-xx | λc | 1260 | 1310 | 1360 | nm |
| FTTR-B15L2-xxxx-xx | 1530 | 1550 | 1570 | nm | ||
| Spectral Width(FWHM) | △λ | – | – | 4 | nm | |
| Average Output Power | Pout | -9 | – | -3 | dBm | |
| Extinction Ratio | ER | 9 | – | – | dB | |
| Relative Intensity Noise | RIN | – | – | -117 | dB/Hz | |
| Data Input Low Voltage | VL | 0 | – | 0.7 | V | |
| Data Input High Voltage | VH | 2.4 | – | VCC | V | |
| Eye Diagram | ITU-T G.957 Compliant | |||||
| Data Input | TTL/LVTTL | |||||
| Receiver | ||||||
| Parameter | Symbol | Min. | Typical | Max. | Unit | |
| Wavelength of Operation | 入c | 1100 | – | 1610 | nm | |
| Receiver Sensitivity | Pmin | -20 | – | dBm | ||
| Receiver Overload | Pmax | -3 | – | dBm | ||
| Signal Detect Assert Level | Pa(SD H-L) | – | – | -20 | dBm | |
| Signal Detect Deassert Level | Pd(SD L-H) | -25 | – | – | dBm | |
| Signal Detect Hysteresis | Phys | – | 1 | – | dB | |
| Data Output Low Voltage | VL | – | – | 0.7 | V | |
| Data Output High Voltage | VH | 3 | – | VCC | V | |
| 4.5 | – | VCC | V | |||
| Data Output | TTL/LVTTL | |||||
| Alarm Output | TTL/LVTTL | |||||
Notes:
1.The optical power is launched into 9/125um SMF.
2.The maximum Optical Output Power complies with the IEEE 802.3z specification,and is class 1 laser eye safe.
3.Value of output power and sensitivity can be customized according to the demand.
Dimension and optical interface
BIDI SC optical interface on the edge:(Industrial Grade)
BIDIFC optical interface on the edge:(Industrial Grade)
BIDIST optical interface on the edge:(Industrial Grade)
| Part Number | Product Description |
| FTTR-B13L2-20-xx | 1*9，10M，BIDI，Tx1310/Rx1550nm，20KM，0℃~+70℃，SC(FC/ST) |
| FTTR-B15L2-20-xx | 1*9，10M，BIDI，Tx1550/Rx1310nm，20KM，0℃~+70℃，SC(FC/ST) |
| FTTR-B13L2-40-xx | 1*9，10M，BIDI，Tx1310/Rx1550nm，40KM，0℃~+70℃，SC(FC/ST) |
| FTTR-B15L2-40-xx | 1*9，10M，BIDI，Tx1550/Rx1310nm，40KM，0℃~+70℃，SC(FC/ST) |
| FTTR-B13L2-20I-xx | 1*9，10M，BIDI，Tx1310/Rx1550nm，20KM，-40℃~+85℃，SC(FC/ST) |
| FTTR-B15L2-20I-xx | 1*9，10M，BIDI，Tx1550/Rx1310nm，20KM，-40℃~+85℃，SC(FC/ST) |
| FTTR-B13L2-40I-xx | 1*9，10M，BIDI，Tx1310/Rx1550nm，40KM，-40℃~+85℃，SC(FC/ST) |
| FTTR-B15L2-40I-xx | 1*9，10M，BIDI，Tx1550/Rx1310nm，40KM，-40℃~+85℃，SC(FC/ST) |
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.