1310/1480/1550 nm 10 W Isolator
The Polarization Insensitive Isolator is designed and manufactured according to Telcordia standard. The unique manufacturing process and optical path epoxy-free design enhance the device's high power handling capability. The optical isolator is characterized with high performance, high reliability and low cost. It has been widely used in EDFAs, fiber lasers, transmitters and other fiber optics communication equipment to suppress back reflection and back scattering.
|
Key Features |
Applications |
|
High Power Handling |
Fiber Lasers |
|
Low Insertion Loss |
EDFA |
|
High Return Loss |
|
Parameter |
Unit |
Value |
|||
|
Stage |
- |
Single Stage |
Dual Stage |
||
|
Grade |
- |
Grade P |
Grade A |
Grade P |
Grade A |
|
Center Wavelength (λc) |
nm |
1310, 1480 or 1550 |
|||
|
Typ. Peak Isolation |
dB |
42 |
40 |
58 |
55 |
|
Min. Isolation, λc ± 10 nm, All Polarization States, 23 ℃ |
dB |
30 |
29 |
46 |
45 |
|
Typ. Insertion Loss, λc, All Polarization States, 23 ℃ |
dB |
0.35 |
0.5 |
0.4 |
0.6 |
|
Max. Insertion Loss, λc ± 20 nm, Operating Temperature |
dB |
0.5 |
0.7 |
0.6 |
0.9 |
|
All Polarization States |
|||||
|
Min. Return Loss (Input/Output) |
dB |
60/55 |
60/55 |
60/55 |
60/55 |
|
Max. Polarization Dependent Loss, 23 ℃ |
dB |
0.10 |
0.15 |
0.10 |
0.15 |
|
Max. Polarization Mode Dispersion |
ps |
0.20 |
0.25 |
0.05 |
0.07 |
|
Max. Optical Power (Continuous Wave) |
W |
10 |
|||
|
Max. Peak Power (Pulse Width, 10 ns) |
kW |
10 |
|||
|
Max. Tensile Load |
N |
5 |
|||
|
Fiber Type |
- |
SMF-28 Fiber |
|||
|
Operating Temperature |
℃ |
- 5 to + 70 |
|||
|
Storage Temperature |
℃ |
- 40 to + 85 |
|||
1IL is 0.3 dB higher, RL is 5 dB lower for each connector added. Optical Power will be 1 W only with connector added.
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.