Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. F-tone's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
Features & Applications
| Features | Applications |
|---|---|
| Wavelength 532 - 2100nm available | EDFA |
| Low Insertion Loss | Passive Optical Network |
| High Stability & Reliability | Research |
Specifications
| Parameter | Unit | Value |
|---|---|---|
| Center Wavelength | nm | 1310 |
| Operating Bandwidth | nm | ±50 |
| Coupling Ratio | % | 50:50 |
| Max. Insertion Loss @23℃ | dB | 3.4 |
| Max. Polarization Dependent Loss @23℃ | dB | 0.15 |
| Min. Directivity @23℃ | dB | 50 |
| Max. Return Loss @23℃ | dB | 50 |
| Max. Optical Power (CW) | W | 2 |
| Fiber Type | - | PM Panda Fiber |
| Package Dimensions | mm | φ3*54 |
| Operating Temperature | ℃ | -5~+75 |
| Storage Temperature | ℃ | -40~+85 |
| Splitting Ratio | 50 | % / ±3.0 |
| 40 | % | ±2.5 |
| 30 | % | ±2.0 |
| 20 | % | ±1.5 |
| 10 | % | ±1.0 |
| 5 | % | ±0.7 |
| 1 | % | ±0.3 |
Ordering Information
FUC-①①①①-②③③-④④④-⑤⑥-⑦-⑧⑧⑧⑧ (2x2 Type)
①①①①
- Wavelength:
1310=1310nm, SSSS=Specified
②
- Port Type:
3=1x2, 4=2x2
③③
- Tap Ratio：
50=50/50
④④④
- Fiber type:
008=SMF-28E, SSS=Specified
⑤
-
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.