1 2

1m (3ft) MPO-12 APC (Female) to 6x LC UPC Duplex OS2 Singlemode Elite Breakout Cable, 12 Fibers, Type B, LSZH, Yellow

1m (3ft) MPO-12 APC (Female) to 6x LC UPC Duplex OS2 Singlemode Elite Breakout Cable, 12 Fibers, Type B, LSZH, Yellow

View full details

Compatible

100+ Vendors\n5. QSFP+ MSA Compliant","remark":"

Specifications

1m (3ft) MPO-12 APC (Female) to 6x LC UPC Duplex OS2 Singlemode Elite Breakout Cable, 12 Fibers Jumper, Type B, LSZH

 

The 12 fibers MPO trunk cable provides a worry-free and cost-effective solution for high-density cabling for its connector delivering up to 6 times the density of a standard duplex fiber optic cable connector. Since the MPO-12 also supports the MPO-8 fiber system, it is specially optimized for 40G QSFP28 PSM4 to 10G SFP+ LR, 100G QSFP28 PSM4 to 25G SFP28 LR optics direct connection, data centers, and telecommunications systems applications.

           

Connector A MPO Female Connector B LC UPC Duplex
Fiber Count 12 Fibers Fiber Type OS2 SMF 9/125μm
Polish Type APC to UPC Cable Material LSZH
Armoured No Wavelength 1310/1550nm
Insert Loss ≤0.35dB Return Loss ≥60dB
Cable Diameter 3.0mm Tensile Strength 80/150N (Long/Short Term)
Min. Bend Radius
(Fiber Core)		 10mm Min. Bend Radius
(Fiber Cable)		 20/10D (Dynamic/Static)
Attenuation (dB/km) ≤0.32 at 1310nm, ≤0.18 at 1550nm Polarity Type B
Operating Temperature -10℃~+70℃ Storage Temperature -40℃~+85℃

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

View all

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

View all

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us