Transceivers Type
QSFP+ Optical Transceiver
Compatible
200+ Vendors
Specifications
Cisco QSFP-H40G-ACU1M Compatible 40G QSFP+ DAC Twinax Copper Cable (1-meter, Active, QSFP+ to QSFP+ Cable)
Cisco QSFP-H40G-ACU1M compatible 40G QSFP active copper direct-attach cable (DAC) is comprised of a Twinax copper cable terminated with QSFP form factor modules on both ends. This 40G QSFP+ DAC is verified to interoperate with original Cisco switches, including the Catalyst 3560X/3650/3850/4500/6000/6800/8500/9200/9300/9300X/9300L/9350/9400/9400X/9500/9600/9610/9800 and Nexus 2000/3000/5000/6000/7000/7700/9200/9300/9500/9800 series. This 40G DAC cable has the advantage of convenient installation since the structure of modules is permanently attached to each end.
QSFP+ to QSFP+ 40G DAC cable is suitable for very short-distance transmission. It provides a cost-effective way to build a 40Gb link between QSFP ports of switches or routers with racks and across adjacent racks. F-tone currently offers active QSFP cables in lengths of 1, 3, 5, 7, and 10 meters.
Model Contrast Table
| Part Number | FT-QSFP-PCx | FT-QSFP-ACx | FT-Q4S-PCx | FT-QSFP-Ax | FT-Q4S-Ax |
| Cable Type | Passive Direct Attach Copper | Active Direct Attach Copper | Passive Direct Attach Copper Breakout | Active Optical Cable | Active Optical Cable Breakout |
| Max Data Rate | 40Gbps | 40Gbps | 40Gbps | 40Gbps | 40Gbps |
| Connector Type | QSFP+ to QSFP+ | QSFP+ to QSFP+ | 40G QSFP+ to 4x10 SFP+ | QSFP+ to QSFP+ | 40G QSFP+ to 4x10 SFP+ |
| Wire AWG | 30AWG | 30AWG | 30AWG | / | / |
| Minimum Bend Radius | 33mm | 33mm | 21mm | 7.5mm | 7.5mm |
| Media | Copper | Copper | Copper | Optic Fiber | Optic Fiber |
| Jacket Material | PVC (OFNR) | PVC (OFNR) | PVC (OFNR) | LSZH | LSZH |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-2528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.