1 2

1x 10GBase-X to 1x 10GBase-X SFP+ Ethernet Media Converter - F-tone

1x 10GBase-X to 1x 10GBase-X SFP+ Ethernet Media Converter - F-tone

View full details

Transceivers Type

SFP+ Optical Transceiver

Compatible

100+ Vendors\n5. SFP+ MSA Compliant","remark":"

Specifications

10 Gigabit Ethernet Network Media Converter (1x 10GBase-X to 1x 10GBase-X SFP+)

 

The 10 Gigabit Ethernet media converter enhances communication distance and efficiently transmits data through fiber optic cables. The F-tone media converters offer compatibility with a wide range of transceiver modules, including general 1000Base SFP transceivers, BIDI transceivers, CWDM transceivers, and more. It is essential to ensure consistency in the wavelength, speed rate, and distance of the transceiver modules used at both ends of the media converter.

 

Ports

2 x 10GBase-X SFP+ Port

Standards and Protocols

IEEE802.3an, IEEE802.3ae

Cable Type (Fiber)

Multimode 50/125µm, 62.5/125µm

Single-mode 9/125µm

Cable Type (Copper)

UTP 6,6a Cable (Maximum 100m)

LED Indicators

SFP2, LOOP, SFP1, PWR

DIP Switch

Loopback/LFP/ALS Function

Power Consumption

Full-load<5W

Without Module≤2W

Jumbo Frame

16k

Operation Mode

100M/1.25G/8.5G/10G for Full Duplex

Dimensions (HxWxD)

20x60x90mm

MTBF (hrs)

>50,000Hrs

Latency

3us Ultra-low

Operating Temperature

0°C to 50°C

Input Power

DC 5-12V

Relative Humidity

5%~90% (Non-condensation)

Warranty

1 year

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

View all

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

View all

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us