Transceivers Type
CFP Optical Transceiver
Specifications
100G/200G Coherent CFP2-DCO Transceiver Module
This CFP2 coherent optical module supports wavelengths from 1528 to 1567 nm and has a transmission capacity of up to 200 Gbps. With EDFA for transmission, point-to-point can reach 1000km. The module also features DOM monitoring, allowing wavelength tuning. It was born to configure high-capacity transmission networks, such as DCI， metropolitan area networks, and optical transmission networks for long-haul transmission.
| Part Number: |
CFP2-DCO |
Vendor Name: |
F-tone |
| Form Factor: |
CFP2 |
Data Rate: |
200Gbps |
| Transmission Protocols | 200GbE/OTU4 | Line Modulation |
DP-D/QPSK |
| Max Cable Distance |
1200km |
Tunable Wavelength |
CH13~CH60 (C-Band) |
| Connector Type |
LC Duplex | Input Power Range |
-21~0dBm |
| Transmit Power Range |
-15~1dBm |
Fiber Type |
G.652 SMF |
| FEC Support |
SD FEC, ITU-T G709 FEC |
Power Consumption |
24W |
| Storage Temperature |
-40 to 85°C |
Operating Temperature | 0 to 70°C |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-2528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.