Transceivers Type
SFP Optical Transceiver
Specifications
Juniper Compatible 800G OSFP Finned Top to 2x 400G OSFP Flat Top AEC Breakout Cable (5-meter, Active, OSFP to 2x OSFP, 26/28/30/32/34 AWG)
FT-800G-O2OSFP-AExM is an 800G OSFP finned top to 2x 400G OSFP flat top active electrical cable (AEC) with pull-to-release slide latch design. It is comprised of sixteen differential copper pairs, providing eight data transmission channels at speeds up to 106.25Gbps (PAM4) per channel. The AEC cable achieves 800 to 2x400Gbps signal conversion through 8 channels 100G-PAM4 to dual 4x100G-PAM4 signals for transmission, and it is backward compatible to 53.125Gbps (PAM4) and 25.78125Gbps (NRZ) operating modes.
Available in a broad range of wire gages-from 26AWG to 34AWG, this 800G copper cable assembly features low insertion loss. The 800G OSFP AEC breakout cable supports both 800G Ethernet and InfiniBand Next Data Rate (NDR) systems, is ideal for rack-to-rack connectivity scenarios such as between router, server, storage, and switch.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-2528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.