Part Number: 96F-OM3-BO-XX
96 Fibers Fiber Trunk Cable OM3 MultiMode MMF Multifiber Preterminated 0.9/2.0mm Breakout Fiber Patch Cable - 96 Fibers
This pre-terminated fiber patch cable meets RoHS compliant, and 100% optically tested for insertion loss before shipment, this is very cost-effective for your network cabling, and can be used for longer runs than multimode because they have more resistance to attenuation.
The multifiber fiber trunk cables, provided by F-tone, refer to the 4, 6, 8, 12, 24 and 48 cores. We also provide a full set of OEM service, such as fiber, connector, length, color, fiber grade, specification, material, package etc.
Fiber Counts: 96 Fiber
Mode: 50/125um OM3
Breakout O.D: 0.9mm Option with 2.0 jacket
Insertion Loss: <0.3dB
Return Loss: >50dB
Cable Jacket/Color: PVC/Yellow
Good exchangeability
Low insertion loss and back reflection
Easy to use, easy to install and maintain
Support 10 gigabit data transmitting rates100% optically tested to ensure high performance
Standard or custom configuration
Details Drawing
Note: The default fiber diameter for breakout leg cable is 0.9mm, and the breakout leg can be fixed by Heat Shrink Tube. Custom and OEM
| OEM Label, Printing and Boot Color |
NOTE: Cable length: Any length can be customized as you required. Cable jacket: The default jacket is PVC. LSZH, OFNP, OFNR can be customized. Cable connector: SMA905, VF45, MU and D4 are available.Cable color: Red, Purple, White, Black, Orange and Pink can be customized.
As to customized colors, our MOQ is 1000 meters.
If you need customize others, welcome to contact [email protected].
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.